The Active Directory Domain Services is currently unavailable
- Windows 7 Help Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive
section that covers a wide range of tips and tricks.
Show Threads
Show Posts
Windows 7: The Active Directory Domain Services is currently unavailable
Windows 7 Home Premium 64 bit
The Active Directory Domain Services is currently unavailable
Hi - Fixing my elderly father's W7/64 desktop. Attempting to print form MS Word to an HP3390 does not give any errors but does not print, either. Attempting to &find printer& from MS Word gives &The Active Directory Domain Services is currently unavailable.& I went to services.msc to turn on that service but it does not appear in the list. Driver for the printer is already included in Windows 7, according to the HP support site. Printer is USB connected directly to the computer.
BTW Computer is running MW Word 2003 if that makes any difference.
Any ideas/advice? Thanks!
7 x64 Ultimate
The above notwithstanding, I just went through all the same hoops here - in my case trying to get my laptop to hook up with the HP printer attached via USB to a desktop on the network. Inevitably with HP printers, I went to hell and back trying to install it, and just at just about the point where I was ready to attempt to fling the printer over the horizon - it inexplicably connected and printed just fine.
I think at some point I have been there with almost every printer I have ever owned. Why you can perform the same operation 19 times and get a different result on the 20th ... I have no idea.
Keyboard Logitech cordless K800
Mouse Logitech M510
PSU Antec 500
Cooling Hyper 212 EVO
Hard Drives WD 500GB x2
Samsung SSD 128MB (OS)
Antivirus Avira
7 x64 Ultimate
Just to add - this may actually be a network / firewall issue. If you are running on a network, try rebooting your router or temporarily disabling your firewall.
Keyboard Logitech cordless K800
Mouse Logitech M510
PSU Antec 500
Cooling Hyper 212 EVO
Hard Drives WD 500GB x2
Samsung SSD 128MB (OS)
Antivirus Avira
Win7 Pro 32-bit and XP Pro (17 windows machines)
The problem may instead be that when you installed MS Office, you didn't already have a PHYSICAL or VIRTUAL printer already installed as the default.
That's been the problem with the last six Win7 machines I've installed to.
I forgot how I solved it with the others, so when trying to install my sixth machine over the weekend (yes, started last FRIDAY), finally yesterday I remembered what worked.
Uninstall all MS Office-related products.
Only complete uninstallation corrects the problem, at least if you're using MS Office 2003 and prior.
ALL components must be uninstalled.
Also, if you installed MS Office to some drive other than C:, uninstall and reinstall to C.
(Adobe doesn't work rightly with Word, if the latter isn't completely installed on the C drive.)
2. Make sure that in WINDOWS you have a physical or virtual printer set as your default, and that it works (i.e., print something).
If you've uninstalled your pdf converter, install it now UNLESS you want it to create add-ins for Word (Acrobat 6-7,9 create Word add-ins, as does SmartPDF Creator Pro).
Then, reinstall MS Office products one by one, testing whether your default physical printer is recognized by them.
If 3 is successful, then install your pdf converter.
If not, then you've some other problem I don't know how to fix.
Your pdf converter, if it installs add-ins, then needs to be tested inside and outside Word.
With Adobe Acrobat, usually only the add-in works, but Adobe still can't convert outside Word.
If you convert to Acrobat inside Word, be sure to uncheck the 'reflow and accessibility' boxes, and to check the 'links' boxes that you want to port through.
Else, they won't.
Somehow, reflow conflicts with links, and prevents them from being recognized when viewed in Adobe Acrobat.
The result of #5 is that one of the two conversions (inside or outside Word), works correctly.
I've never seen both of them work correctly.
Before you allow Windows updates, clone your hard drive.
Windows updates tend to damage pdf conversion, and I can't say why or what kind of updates.
I only know it happens, because it's happened to me many times since November last.
So now I've learned that when I have this problem, to just clone before applying updates, then if the problem recurs, to clone back to my hard drive using Clonezilla, turn off the machine afterwards, and then boot up.
I wish I could stop the updates, altogether.
Finally, this procedure was used on 32-bit Windows, though since you're using MS Office 2003, even on 64-bit, you should have the same problems as I did.
Keyboard Dell
Mouse Dell wireless and wired and many others
PSU don't know what that is, sorry
Case Dell chassis
Cooling none
Hard Drives Varies from 80 GB to 1TB
Internet Speed XFINITY 1 GIG
Antivirus varies
Browser Firefox
Other Info XP die-hard just starting into Win7.
&The Active Directory Domain Services is currently unavailable
Similar help and support threads
Have just reinstalled Windows 7 32 bit over Windows 7 64 bit and my computer doesn't now recognise the same printer that it recognised under the 64 bit OS. Could someone please help me with this?
Hardware & Devices
HP 3015 All-in-One has worked fine for years, plugged into wife's PC. Yesterday it stopped communicating a &Active Directory Domain Services unavailable& is cryptic. This error is discussed in various internet fora but no solution found is pertinent to my problem.
Hardware & Devices
I have an Epson Photo R320 printer which has worked on my dell computer - now I get a message &The Active Directory Domain Service is currently unavailable&
Any idea how to get this printer to work (I have &downloaded& new drivers to no avail)
Hardware & Devices
Purchased my Dell Studio 1749 laptop on Mon. and trying to add my printer/copier at my office.
when I go to the print page in Word 2007 there is an Find Printer button.
I've used this feature before to install printers.
but, when I click on the button I get this error message - Active Directory...
Network & Sharing
I have been having problems with my printer since i installed windows 7. It used to be that the printer was the default printer and when i tried to print something it would freeze somewhere between 6%-99% and would not print. I then checked to see that i could still &see& the printer in the 'add...
Hardware & Devices
Hi, I'm new to these forms, my name is Kcaz.
Today I was trying to add wireless printers to my computer (Toshiba running Windows 7 64 bit). At home, I have one wireless printer (Cannon) which works fine. To install that i think I downloaded the drivers from a CD.
Now I was trying to download...
Network & Sharing
Site Links
Windows 7 Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows 7" and related materials are trademarks of Microsoft Corp.
All times are GMT -5. The time now is .java - Http status 404 - servlet login is currently unavailable - Stack Overflow
to customize your list.
Join the Stack Overflow Community
Stack Overflow is a community of 6.4 million programmers, just like you, helping each other.
J it only takes a minute:
This is my login-servlet.xml
&?xml version="1.0" encoding="UTF-8"?&
&beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:mvc="http://www.springframework.org/schema/mvc"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-3.0.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-3.0.xsd
http://www.springframework.org/schema/mvc
http://www.springframework.org/schema/mvc/spring-mvc-3.0.xsd"&
&!-- Enable annotation driven controllers, validation etc... --&
&mvc:annotation-driven /&
&context:component-scan base-package="com.smart.control" /&
&bean id="viewResolver"
class="org.springframework.web.servlet.view.InternalResourceViewResolver"&
&property name="prefix"&
&value&&/value&
&/property&
&property name="suffix"&
&value&.jsp&/value&
&/property&
&bean id="multipartResolver"
class="org.springframework.monsMultipartResolver"&
This is my LoginController
@RequestMapping(value = "Login.html", method = RequestMethod.POST)
public String authenticateLogin(HttpServletRequest request, HttpSession session) {
System.out.println("hell");
return "Login";
The servlet login is currently unavailable message is being displaying when submitting the form through post method.
Please let me know what is wrong here.
1,418103356
Know someone who can answer?
Share a link to this
via , , , or .
Your Answer
Sign up or
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Post as a guest
By posting your answer, you agree to the
Browse other questions tagged
Stack Overflow works best with JavaScript enabled