sf2281 开卡失败求助|SSD存储技术 - 数码之家
查看完整版本: [--
赞助商链接
淘宝购买的SF2281开卡失败了......恳求高人们指点一下...感激不尽啊这次用的F是intel 29F16B08CAME1[attachment=5839338][attachment=5839341][attachment=5839339]上了4贴，开卡时在FLASH_TEST就发生FAIL了[attachment=5839345]有办法知道是哪两片F出问题吗?版子上的电阻需要修改吗?另外再请教，工程跳线讲的是7-0下面的两个孔吗?是不是上电之前要先短接呢?[attachment=5839342][attachment=5839407]
赞助商链接
贴的位置好像不对！
赞助商链接
Fail说明颗粒坏块过多了，如果贴对了那就换颗粒吧
清空一下在贴上去也许就能过了
建议你还是换个好点芯片再试试，你这个芯片怎么看怎么不靠谱
还有芯片位置没有贴错
最近正打算diy 个2281，看来2281不好弄啊。。
芯片太差了，坏块过多
求问板子多少钱在哪买的呢?
你把log发出来吧，还要M币下载，想帮你都困难
demiurge3141:你把log发出来吧，还要M币下载，想帮你都困难 ( 21:23) 真是非常抱歉...不知道为什么附件已经设定成无售密，价格也是0了....结果还需要M币我还是直接贴上来好了
感谢各位的回复... F位置应该没错，我比较担心电阻上错了....
今天换了F之后(只贴3片)，开卡进步到70%了....不过还是失败啊.... ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Overall Summary:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&&&&&&&&&&Start Time: Wed, 05/06/2015 @ 12:57:42 &&&&&&&&&&&&&&&&&&End Time: Wed, 05/06/2015 @ 12:58:35 &&&&&&&&&&&& OverallResult: FAIL &&&&&&&&&&&&&&&&
ExitCode: (0x:SF_GENESIS_FORMAT_ERROR) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Environment Settings:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&&&&Input Parameters: &&&&&&&&&&&&&&&&&&argv[1]: -PROCESS_SSD&&&&&&&&&&&&&&&&&&argv[2]: 0:0:0:0&&&&&&&&&&&&&&&&&&argv[3]: /root/sf2000/MPT/FW_SF-2000_MP_5-0-7_Client..mfp&&&&&&&&&&&&&&&&&&argv[4]: /root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig&&&&&&&&&&&&&&&&&&argv[5]: 111222&&&&&&&&&&&&&&&&&&argv[6]: 222333&&&&&&&&&&&&&&&&&&argv[7]: LOG=/root/sf2000/log2/111222_sf2000_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log &&&&&&&&&&&&&&&&&&Log File: /root/sf2000/log2/111222_sf2000_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log &&&&&&&&&&&&&&&&&&Hostname: sf2000 &&&&&&&&&& Host IP Address: 127.0.0.1 &&&&&&&&&&&&&& Port Number: 0 &&&&&&&&&&&&&&&&DeviceName: /dev/sg0 &&&&&&&&SF_Genesis Version: v1.7.0.-fc14-32bit && SF_Core Library Version: v1.7.1.-fc14-32bit &&&&&&&& SF_OS_Information: Linux 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Post Processing Device Information:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&&&&&&&&&&&& WWN OUI: UNKNOWN &&&&&&&&&&&&&&WWN UniqueID: UNKNOWN &&&&&&&&&&&&&&&&Serial No.: UNKNOWN &&&&&&&&&&&&&&&& Model No.: UNKNOWN &&&&&&&& Firmware Revision: UNKNOWN &&&&&&&&&&&&&&ROM Revision: UNKNOWN &&&&&&&&&&&&NAND Page Size: UNKNOWN &&&& Number Of Chip Enable: UNKNOWN &&&&&&&&&& Logical Sectors: UNKNOWN &&&&&&&&&&&&&&&&&& NAND ID: UNKNOWN &&&&&&&&Flash Manufacturer: UNKNOWN &&&&&&&&&&&&&&Flash Device: UNKNOWN ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SandForce Genesis Utility v1.7.0.-fc14-32bit
SF_Core Library: v1.7.1.-fc14-32bit
Copyright , LSI Corporation, All Rights Reserved Worldwide. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [Wed 05/06/:42] - SF_Genesis has been invoked with the following parameters:&&&&&&&&&&&&&&&&&&&& ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&&&&&&&&&&&&&&&&argv[1]: -PROCESS_SSD&&&&&&&&&&&&&&&&&&&&&&argv[2]: 0:0:0:0&&&&&&&&&&&&&&&&&&&&&&argv[3]: /root/sf2000/MPT/FW_SF-2000_MP_5-0-7_Client..mfp&&&&&&&&&&&&&&&&&&&&&&argv[4]: /root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig&&&&&&&&&&&&&&&&&&&&&&argv[5]: 111222&&&&&&&&&&&&&&&&&&&&&&argv[6]: 222333&&&&&&&&&&&&&&&&&&&&&&argv[7]: LOG=/root/sf2000/log2/111222_sf2000_DATETIMESTAMP_0.0.0.0_PROCESS_SSD_RESULT.log&&&&&&&&&&&&&&&&&&&& ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[Wed 05/06/:42] - Instructing the operating system to purge any existing cached data for device: '0:0:0:0'[Wed 05/06/:47] - Issuing a discovery command for device: '0:0:0:0'[Wed 05/06/:52] - Discovery command completed...[Wed 05/06/:52] - Waiting 5 seconds for the system to settle...[Wed 05/06/:57] - Device designation string '0:0:0:0' is mapped to node '/dev/sg0'[Wed 05/06/:57] - Proceeding to process SSD device with the following parameters:&&~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&&&&&&&&DeviceName = /dev/sg0&&&&MFP Package Filename = /root/sf2000/MPT/FW_SF-2000_MP_5-0-7_Client..mfp&&&&&&Configuration File = /root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig&&&&&&&&&&&&&&Serial No. = 111222&&&&&&&& World Wide Name = 222333&&~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[Wed 05/06/:57] - Successfully received the IDENTIFY data from the drive...[Wed 05/06/:57] - Validating Manufacturing Firmware Package: /root/sf2000/MPT/FW_SF-2000_MP_5-0-7_Client..mfp[Wed 05/06/:09] - Successfully opened the package: /root/sf2000/MPT/FW_SF-2000_MP_5-0-7_Client..mfp[Wed 05/06/:09] - file&&/root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig Loaded successfully[Wed 05/06/:09] - Warning:&&Unable to query diagnostics information to perform power management settings check[Wed 05/06/:09] - B01 Power Management configuration request detected[Wed 05/06/:09] - Successfully extracted *.DriveConfig file: /root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig[Wed 05/06/:09] - Extracted Config_ID: 1 (22170) in DriveConfig file: /root/sf2000/MPT/Configuration_Files/00.0505..FTdriveconfig.driveconfig[Wed 05/06/:09] - Extracted SerialOutputControl: 0[Wed 05/06/:09] - Searching for flashware image for configuration 22170[Wed 05/06/:09] - Manifest found for configuration 22170[Wed 05/06/:09] - Flashware image extracted: 22170_fw_cl_mlc_Intel_64Gb_JS29F16B08CAME1_1Q_2C_1D_PP_R0.vic[Wed 05/06/:09] - Searching for manufacturing image for configuration 22170[Wed 05/06/:09] - Manifest found for configuration 22170[Wed 05/06/:09] - Manufacturing image extracted: 22170_mf_mlc_Intel_64Gb_JS29F16B08CAME1_1Q_2C_1D_PP_R0.vic[Wed 05/06/:09] - Proceeding in ROM mode, download feature 3...[Wed 05/06/:09] - Successfully downloaded MFB to the drive...[Wed 05/06/:09] - Waiting (5 sec) for the drive to settle...[Wed 05/06/:14] - Successfully received the IDENTIFY data from the drive...[Wed 05/06/:14] - Firmware revision reported to be: '507ABBM0'.&&This indicates MFB download was successful.[Wed 05/06/:14] - Successfully enabled SMART capabilities...[Wed 05/06/:16] - Successfully issued a diagnostic unlock...[Wed 05/06/:18] - Performing the flash test of block 0 (0x0000)...[Wed 05/06/:19] - Flash Test Results:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~----------------------------------------------------------------------------- Flash Test Parameters:&&&&&&&&&&&&&&&&&&&&&&&&&&&& -----------------------------------------------------------------------------&&&&&&&&&&&&&& Block Count: 0&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&Page Count: 1&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Bus Count: 1&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&Chip Enabled Count: 2&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Die Count: 1&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&Lane Count: 3&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Plane Count: 2&&&&&&&&&&&&&&&&&&&&&&----------------------------------------------------------------------------- Results Notes:&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&-----------------------&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& N1 - At least one page tested and passed with no bit errors.&& N2 - No test data available.&&Test may have aborted, or failed during the testing.&& N3 - At least one page tested and had errors less than or equal to half the range of ECC correction power.&& N4 - At least&&one erased page tested had bit error rate greater than half the correction power.&& N5 - Walking zeros test failed.&& N6 - Walking ones test failed.&& N7 - Block contained factory bad block markings and testing was skipped.&& N8 - At least one page tested and had bit error rate greater than the correction power on plane 0.&& N9 - Block in plane 0 was marked as a factory bad block.&&N10 - At least one page tested and had bit error rate greater than the correction power on plane 1.&&N11 - Block in plane 1 was marked as a factory bad block.-----------------------------------------------------------------------------+------+------+------+------+--------+--------------------------------------------+---------+| Bus&&| CE&& | Die&&| Lane | Value&&| Result Notes&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& | Overall |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 0&&&&| 0&&&&| 0&&&&| 0x0002 | N3&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& | WARNING |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 0&&&&| 0&&&&| 1&&&&| 0x0022 | N3,N5&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&| WARNING |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 0&&&&| 0&&&&| 2&&&&| 0x0062 | N3,N5,N6&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& | WARNING |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 1&&&&| 0&&&&| 0&&&&| 0x0062 | N3,N5,N6&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& | WARNING |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 1&&&&| 0&&&&| 1&&&&| 0x0042 | N3,N6&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&| WARNING |+------+------+------+------+--------+--------------------------------------------+---------+| 0&&&&| 1&&&&| 0&&&&| 2&&&&| 0x0062 | N3,N5,N6&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& | WARNING |+------+------+------+------+--------+--------------------------------------------+---------+-----------------------------------------------------------------------------&&Total Number of test results: 6&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&Number of failures: 0&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& Number of Passed with warnings: 6&&&&&&&&&&&&&&&&&&&&&&&&&&&&No. Passed without warnings: 0&&&&&&&&&&&&&&&&&&&&&&-----------------------------------------------------------------------------~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[Wed 05/06/:19] - Performing the FORMAT Command with the following parameters: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&&&&&&&& MemoryWearCycleCapability = 0 &&&&&&&&&&&&&&CurrentPE_CycleCount = 0 &&&&&&&&&&&&&&&&&&&& LifeInSeconds = 0 &&&&&&&&&&&&&&&&&& LogicalCapacity =
&&&&&&&&&&&&&&&&&&&&&&&&SectorSize = 512 &&&&&&&&&&&& SectorAlignmentOffset = 0 &&&&&&&&&&&&&&&&&&ExpectedMemoryID = 39)&&&&&&&&&&&&&&&&&& ExpectedNumDies = 0 &&&&&&&&&&&&&& SerialOutputControl = 0 &&&&&&&&&&&&&&&&&&&&&&&&&& Time[8] = 0x0000 &&&&&&&&&&&&MiscFlag_Erase_R_Block = 0 &&&& MiscFlag_PanicHandlingEnabled = 0 &&&&&&&&MiscFlag_PanicOnSATA_Error = 0 &&MiscFlag_WriteThrottlingTestMode = 0 &&&&&&MiscFlag_DisableUserBandECCX = 1 &&&&&&&&&&&&&&&&&&&&&&&&L_PageSize = 0 &&&&&&&&&&&&&&&&&&&&&&&&E_PageSize = 0 &&&&&&&&&&&&&&ErrorCorrectionPower = 0 &&&&&&ConfigDeviceReadDisturbCount = 0 && ConfigDeviceReadDisturbCountLow = 0 &&&&&&&&&&&&&&&&&&ExtraOptions_0_1 = 0 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~[Wed 05/06/:35] - FATAL_ERROR: Could not perform the FORMAT() operation on the drive... (0x:SF_SCT (C048h): Root Creation Failed (MFB format))[Wed 05/06/:35] - End of Genesis manufacturing log.[Wed 05/06/:35] - Exiting...
你看看之前的帖子，对照一下有些人的板子（你的板子之前焊接的是东芝颗粒），把1.8v的DC-DC去掉，再1.8v 电感旁边的0805焊盘，用0欧的电阻短接起来。
ph3203485:你看看之前的帖子，对照一下有些人的板子（你的板子之前焊接的是东芝颗粒），把1.8v的DC-DC去掉，再1.8v 电感旁边的0805焊盘，用0欧的电阻短接起来。 ( 22:10) 感谢大大的提示...应该是像您在这篇说的那样吧?!我来试试~~^^
试试改下配置文件里的额外写保护 ROOT错误 90%是这个
查看完整版本: [--
Powered by
Gzip enabled