Research on Stop Loss
17th April, 2002
The Colour of Money - Series on Forex Hedging
:: & &Use a Forecast for Budgeting28th May, 2012
Dear Readers,
We are dispensing with the usual market readings today morning,
because we feel a great NEED to discuss Stop Losses with you.
Market readings might follow in driplets later during the day, OR we
may just come out with the Evening Edition. Hopefully you will not
mind this small modification in the routine and will like what we
have on offer today morning.
TALKING ABOUT STOP LOSS
The most rudimentary set of Trading Rules lay justifiable stress on
the importance of cutting Loss on trades that go wrong. And trades
tend to go wrong more often than we would like. There is very little
guidance available, however, on the How-When-Where regarding
Stop Losses.
We would like to share some of our experiences today with you,
Dear Readers, for whatever they might be worth. Your comments
and feedback are welcome.
We touch upon the following:
. It needs to be pointed out here that it
is NOT necessary to SAR at the same instance and level all the
time. If you are an intra-week (or longer) Trader, you can enter into
a Reverse trade after stopping out of the original trade, allowing
yourself time to reformulate your strategy.
In the second case, where we continue to believe in our directional
reading but want to re-establish the trade at a better level, the
follow up action required is to, in fact, Sell or Buy again (as the
case may be) at a better level.
We, personally, are not too good at following through on a Stop
Loss. But, we did not do too badly in the last few days. You might
recall we had sold $250K against JPY at 131.70 on 11-Apr-02.
Thereafter the market went up to 132.40 on 15-Apr and came down
to 131.36 on the same day before moving up back up to 132.20+
on the same day. We stopped out of our $250 K Short (entry
131.70) on the way up from 131.36 at 131.80 on 15-Apr but re-
established the Short at 132.10 (albeit a smaller amount of $200K).
Of course, the Market was magnanimous enough to give this one
to us and we are grateful to it.
Our Jul'15 Longterm forecast is now available. To order a PAID copy, please
In order to read our previous forecasts please .Stop-Loss Order Definition & Example | Investing Answers您现在的位置：>>
>>正文内容
请问这程式code哪里出错了　[MultiCharts MC]
咨询内容：
Price( Close ),
Length1( 200 ),
BollingerPrice( Close ),
TestPriceUBand( Close ),
TestPriceLBand( Close ),
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 ),
Displace( 0 ) ,
& & & &ConfirmBars( 1 )
Displace1( 0 ) ;
variables:
var0( 0 ) ;
var1( 0 ),
var2( 0 ),
var3( 0 ) ,
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var0 + NumDevsUp * var1 ;
var4 = var0 + NumDevsDn * var1 ;
condition1 = Displace &= 0 or CurrentBar & AbsValue( Displace ) ;
if condition1 then&
var0 = WAverage( Price, Length1 ) ;
Plot1[Displace]( var0, &AvgWtd& ) ;
& & & &Plot2[Displace]( var3, &UpperBand& ) ;
Plot3[Displace]( var2, &LowerBand& ) ;
Plot4[Displace]( var0, &MidLine& ) ;
condition2 = Price & var0 and cross over var3 ;
if condition2 then&
var5 = var5 + 1&
var5 = 0 ;
condition2 = CurrentBar & ConfirmBars and var5 = ConfirmB
if condition2 then & & & & & & & & & & &&
Buy ( &WMACrossLE& )
客服人员您好
我想写一个在200wma之上而且突破布林通道上缘的买进讯号
但是在第12行出错，请问这是何种错误
另外请问一下
Displace( 0 ) , 这是什麽意思
condition1 = Displace &= 0 or CurrentBar & AbsValue( Displace ) ;
condition1 = Price & AverageFC( Price, Length ) ;
if condition1 then&
var0 = var0 + 1&
var0 = 0 ;
condition1 = CurrentBar & ConfirmBars and var0 = ConfirmB
这是买进讯号
var0=var0+1 这是什麽意思
以及condition1的意思为何
所以有很多问题]
MC技术部：
Price( Close ),
Length1( 200 ),
BollingerPrice( Close ),
TestPriceUBand( Close ),
TestPriceLBand( Close ),
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 ),
Displace( 0 ) ,
& & & &ConfirmBars( 1 )
Displace1( 0 ) ;
variables:
var0( 0 ) ;
var1( 0 ),
var2( 0 ),
var3( 0 ) ,
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var0 + NumDevsUp * var1 ;
var4 = var0 + NumDevsDn * var1 ;
condition1 = Displace &= 0 or CurrentBar & AbsValue( Displace ) ;
if condition1 then&
var0 = WAverage( Price, Length1 ) ;
Plot1[Displace]( var0, &AvgWtd& ) ;
& & & &Plot2[Displace]( var3, &UpperBand& ) ;
Plot3[Displace]( var2, &LowerBand& ) ;
Plot4[Displace]( var0, &MidLine& ) ;
condition2 = Price & var0 and cross over var3 ;
if condition2 then&
var5 = var5 + 1&
var5 = 0 ;
condition2 = CurrentBar & ConfirmBars and var5 = ConfirmB
if condition2 then & & & & & & & & & & &&
Buy ( &WMACrossLE& )
客服人员您好
我想写一个在200wma之上而且突破布林通道上缘的买进讯号
但是在第12行出错，请问这是何种错误
ConfirmBars( 1 )
Displace1( 0 ) ;&==第十二行是因为&中间少了&,&分隔..
var0( 0 ) ;
var1( 0 ),&==&;&是用来告诉PL该断语法已经结束了，所以正确该是var(0),var1(0),
condition2 = Price & var0 and cross over var3 ;&== 这里少了Price..正确为condition2 = Price & var0 and Price cross over var3 ;
最後因为是讯号！所以以下都不能出现在讯号里..
if condition1 then
var0 = WAverage( Price, Length1 ) ;
Plot1[Displace]( var0, &AvgWtd& ) ;
&&&&&& Plot2[Displace]( var3, &UpperBand& ) ;
Plot3[Displace]( var2, &LowerBand& ) ;
Plot4[Displace]( var0, &MidLine& ) ;&==(而且这里也少了正确为if ...then begin...)
MC技术部：
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsDn( 2 ) ;
variables:
var0( 0 ),
var0 = BollingerBand( BollingerPrice, Length, NumDevsDn ) ;
var1 = WAverage(price,Length1);
condition1 = Price & var1 and Price cross over var0 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &Bwma& )
setstoploss(10000);
这是我後来的code
不过在2007年之後
都没有买进讯号出现
为什麽为这样
是哪里出错了吗
MC技术部：
var0 = BollingerBand( BollingerPrice, Length, NumDevsDn ) ;
var1 = WAverage(price,Length1);
condition1 = Price & var1 and Price cross over var0 ;
您可以尝试另外画出var0及var1以确认是否有符合进场条件～
因为我这里测试也是交易一段後就不再有进场动作...^^
MC技术部：
因为你只有作多没有作空
只有停损没有停利
所以在低点进场作多之後就没有符合的出场条件
以致於一直抱单不出
MC技术部：
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 );
variables:
var0( 0 ),
& & & &var2(0),
& & & &var3(0),
& & & &var4(0);
var0 = WAverage(price,Length1);
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var1 + NumDevsUp * var2 ;
var4 = var1 + NumDevsDn * var2 ;
condition1 = Price & var0 and Price cross over var3 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &BUYwma& )
condition3 = Price & var0 and Price cross under var4 ;
if condition3 then&
& & & &sell (&BUYSTOP&)
condition2 = Price & var0 and Price cross under var4 ;
if condition2 then&
& & & SellShort(&SELLwma&)
condition4 = Price & var0 and Price cross over var3 ;
if condition4 then&
& & & buytocover (&SELLSTOP&)
在请问客服人员
这程式码在编译的时候出现函数错误
请问是哪里出错了
谢谢客服人员
编辑文章 by 陈胖
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsDn( 2 ) ;
variables:
var0( 0 ),
var0 = BollingerBand( BollingerPrice, Length, NumDevsDn ) ;
var1 = WAverage(price,Length1);
condition1 = Price & var1 and Price cross over var0 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &Bwma& )
setstoploss(10000);
这是我後来的code
不过在2007年之後
都没有买进讯号出现
为什麽为这样
是哪里出错了吗
var0 = BollingerBand( BollingerPrice, Length, NumDevsDn ) ;
var1 = WAverage(price,Length1);
condition1 = Price & var1 and Price cross over var0 ;
您可以尝试另外画出var0及var1以确认是否有符合进场条件～
因为我这里测试也是交易一段後就不再有进场动作...^^
因为你只有作多没有作空
只有停损没有停利
所以在低点进场作多之後就没有符合的出场条件
以致於一直抱单不出
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 );
variables:
var0( 0 ),
& & & &var2(0),
& & & &var3(0),
& & & &var4(0);
var0 = WAverage(price,Length1);
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var1 + NumDevsUp * var2 ;
var4 = var1 + NumDevsDn * var2 ;
condition1 = Price & var0 and Price cross over var3 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &BUYwma& )
condition3 = Price & var0 and Price cross under var4 ;
if condition3 then&
& & & &sell (&BUYSTOP&)
condition2 = Price & var0 and Price cross under var4 ;
if condition2 then&
& & & SellShort(&SELLwma&)
condition4 = Price & var0 and Price cross over var3 ;
if condition4 then&
& & & buytocover (&SELLSTOP&)
在请问客服人员
这程式码在编译的时候出现函数错误
请问是哪里出错了
谢谢客服人员
编辑文章 by 陈胖
var0 = BollingerBand( BollingerPrice, Length, NumDevsDn ) ;
var1 = WAverage(price,Length1);
condition1 = Price & var1 and Price cross over var0 ;
您可以尝试另外画出var0及var1以确认是否有符合进场条件～
因为我这里测试也是交易一段後就不再有进场动作...^^
因为你只有作多没有作空
只有停损没有停利
所以在低点进场作多之後就没有符合的出场条件
以致於一直抱单不出
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 );
variables:
var0( 0 ),
& & & &var2(0),
& & & &var3(0),
& & & &var4(0);
var0 = WAverage(price,Length1);
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var1 + NumDevsUp * var2 ;
var4 = var1 + NumDevsDn * var2 ;
condition1 = Price & var0 and Price cross over var3 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &BUYwma& )
condition3 = Price & var0 and Price cross under var4 ;
if condition3 then&
& & & &sell (&BUYSTOP&)
condition2 = Price & var0 and Price cross under var4 ;
if condition2 then&
& & & SellShort(&SELLwma&)
condition4 = Price & var0 and Price cross over var3 ;
if condition4 then&
& & & buytocover (&SELLSTOP&)
在请问客服人员
这程式码在编译的时候出现函数错误
请问是哪里出错了
谢谢客服人员
编辑文章 by 陈胖
因为你只有作多没有作空
只有停损没有停利
所以在低点进场作多之後就没有符合的出场条件
以致於一直抱单不出
BollingerPrice( Close ),
TestPriceLBand( Close ), &&
Price( Close ),
Length1( 200 ), & & & & & & & & & & & & & & & & & & & & & & & & & & &
Length( 20 ),
NumDevsUp( 2 ),
NumDevsDn( -2 );
variables:
var0( 0 ),
& & & &var2(0),
& & & &var3(0),
& & & &var4(0);
var0 = WAverage(price,Length1);
var1 = AverageFC( BollingerPrice, Length ) ;
var2 = StandardDev( BollingerPrice, Length, 1 ) ;
var3 = var1 + NumDevsUp * var2 ;
var4 = var1 + NumDevsDn * var2 ;
condition1 = Price & var0 and Price cross over var3 ;
if condition1 then
& & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & &&
Buy ( &BUYwma& )
condition3 = Price & var0 and Price cross under var4 ;
if condition3 then&
& & & &sell (&BUYSTOP&)
condition2 = Price & var0 and Price cross under var4 ;
if condition2 then&
& & & SellShort(&SELLwma&)
condition4 = Price & var0 and Price cross over var3 ;
if condition4 then&
& & & buytocover (&SELLSTOP&)
在请问客服人员
这程式码在编译的时候出现函数错误
请问是哪里出错了
谢谢客服人员
编辑文章 by 陈胖
【字体： 】【】【】
没有相关内容
本月热门排行
会员登录/注册