请问下,PSP的金手指在游戏中怎麼用?我调不出来，谢谢_百度知道
请问下,PSP的金手指在游戏中怎麼用?我调不出来，谢谢
那个音符键无法出来，急呀..
提问者采纳
你是不是没有激活呀完全关机,按R进Cfw选第一项进 再选第二项进 选你要开的文件ON然后再试试看，谢谢。
提问者评价
可以了，谢谢大家。。。
其他类似问题
金手指的相关知识
其他3条回答
+和-一起按试一试
是第一次安装插件吗?试一下关机重启
用FREECHEAT按音符键,最好第一次按了后过5秒后再按一次.还可能是因为你没在修复模式中激活.开机前按住R开机进入P开头的目录再将里面所有的选项改为E开头的, 就可以了,最后你是不是全安装到为了
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁PSP怎麼录视频啊？？？_百度知道
PSP怎麼录视频啊？？？
我搞了这个R什么的软件按“开始”，然后游戏都没显示黑屏的。
我有更好的答案
按默认排序
RJL的视频录制软件需要在PSP安装使用插件并且用USB线连接到电脑，打开对应的文件才能录取的
都搞定了，还是不行
不如加我（）直接问吧
首先你要保证你的那个游戏必须能够全屏。之后下载个‘屏幕录像专家V7.5’就可以了，这东西百度一搜一火车的。傻瓜式操作，我用这个软件录过PSP版的天才麻将少女游戏。
其他类似问题
6人觉得有用
录视频的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁我的PSP3000将那个破解程序放进系统裏面可是却显示损坏文件，我该怎麼办？_百度知道
我的PSP3000将那个破解程序放进系统裏面可是却显示损坏文件，我该怎麼办？
是说5.03 GEN-A吧.那个破解程序不是放进PSP里面的,是将PSP连上电脑再运行LAUNCH-ME.exe,填上PSP的盘符按STAR,程序会自动在PSP里生成那个INSTALLER-LOADER这样一个程序,断开与电脑的连接再用PSP运行这个程序就进入破解了,运行后黑屏出现英文,稍等几秒,按R键,出现提示完成的英文后按O键憨互封就莩脚凤协脯茅,OK,完成破解
其他类似问题
您可能关注的推广
psp3000的相关知识
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁查看: 1236|回复: 3
战士, 积分 1193, 距离下一级还需 307 积分
精华0帖子威望0 点积分1193 点注册时间最后登录
本帖最后由 michaelwoo 于
18:07 编辑
硬盤燈閃刷了2-3分鐘之後，電源燈就在一閃一閃了
是刷完了嗎?
救磚成功的U盤刷得時間要多久？
----------------------------------------------------------------------------
在失敗無數次之後終於都成功救磚了
目前是R3.55偽裝4.21的，應該在怎麼樣更新到最新最穩定的自製版本？
骑士, 积分 2350, 距离下一级还需 650 积分
精华0帖子威望0 点积分2350 点注册时间最后登录
蛮久的，尤其是其中一次刷写系统固件一开始要等上3分钟左右U盘和硬盘的灯才会闪耀。在此之前千万不要以为是机器没反应去做关机的动作。
从成功进入工厂模式到救砖过程合计需要20分钟这样。
战士, 积分 1193, 距离下一级还需 307 积分
精华0帖子威望0 点积分1193 点注册时间最后登录
我真的憤怒了，PSP可以進工廠模式，U盤也有在刷文件
但是就是刷不回來，一下是USB里的UPDATER_LOG.TXT代碼，很明顯的失敗
求高手幫助
manufacturing updating start
PackageName = /dev_usb000/PS3UPDAT.PUP
settle polling interval success
vflash is enabled...
creating system regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_UTILITY:HDD0, CELL_FS_UFS)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_UTILITY:HDD1, CELL_FS_FAT)
creating system regions done.
boot from nor flash...
creating nor flash regions...
create storage region: (region id = 2)
create storage region: (region id = 3)
creating flash regions...
create storage region: (region id = 1)
create storage region: (region id = 2)
format partition: (region_id = 2, CELL_FS_IOS:BUILTIN_FLSH1, CELL_FS_FAT)
create storage region: (region id = 3)
format partition: (region_id = 3, CELL_FS_IOS:BUILTIN_FLSH2, CELL_FS_FAT)
create storage region: (region id = 4)
format partition: (region_id = 4, CELL_FS_IOS:BUILTIN_FLSH3, CELL_FS_FAT)
create storage region: (region id = 5)
create storage region: (region id = 6)
Initializing
taking a while...
start Updating Proccess
Initialize elapsed time = 54 msec
Check UPL elapsed time = 54 msec
check Package Size
get package size elapsed time = 15 msec
start Updating Package
Update packages num = 30
Update packages total size =
Update Package Revoke list
read package revoke list package (576 bytes) elapsed = 2 msec
update package revoke list elapsed = 179 msec
Update Package Revoke list done(0x)
Update Core OS Package
read core os package (5212154 bytes) elapsed = 440 msec
update core os package elapsed = 45513 msec
Update Core OS Package done(0x)
Update VSH Package
sys_memory_container_create() success(id = 0xc0effffe)
Update VSH's package : 1/22
read vsh package (1870 bytes) elapsed = 3 msec
decrypt and verify vsh package elapsed = 45 msec
write vsh package elapsed = 1584 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 1031 msec
Update VSH's package : 2/22
read vsh package (1986317 bytes) elapsed = 168 msec
decrypt and verify vsh package elapsed = 154 msec
write vsh package elapsed = 196 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 163 msec
Update VSH's package : 3/22
read vsh package (4827124 bytes) elapsed = 397 msec
decrypt and verify vsh package elapsed = 314 msec
write vsh package elapsed = 255 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 310 msec
Update VSH's package : 4/22
read vsh package (4184462 bytes) elapsed = 353 msec
decrypt and verify vsh package elapsed = 279 msec
write vsh package elapsed = 865 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 321 msec
Update VSH's package : 5/22
read vsh package (3217207 bytes) elapsed = 276 msec
decrypt and verify vsh package elapsed = 240 msec
write vsh package elapsed = 1216 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 281 msec
Update VSH's package : 6/22
read vsh package (28581 bytes) elapsed = 11 msec
decrypt and verify vsh package elapsed = 48 msec
write vsh package elapsed = 257 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 80 msec
Update VSH's package : 7/22
read vsh package (7317217 bytes) elapsed = 624 msec
decrypt and verify vsh package elapsed = 383 msec
write vsh package elapsed = 2990 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 406 msec
Update VSH's package : 8/22
read vsh package ( bytes) elapsed = 884 msec
decrypt and verify vsh package elapsed = 286 msec
write vsh package elapsed = 1887 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 410 msec
Update VSH's package : 9/22
read vsh package ( bytes) elapsed = 872 msec
decrypt and verify vsh package elapsed = 294 msec
write vsh package elapsed = 3196 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 438 msec
Update VSH's package : 10/22
read vsh package ( bytes) elapsed = 841 msec
decrypt and verify vsh package elapsed = 278 msec
write vsh package elapsed = 817 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 435 msec
Update VSH's package : 11/22
read vsh package ( bytes) elapsed = 886 msec
decrypt and verify vsh package elapsed = 297 msec
write vsh package elapsed = 5537 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 498 msec
Update VSH's package : 12/22
read vsh package ( bytes) elapsed = 856 msec
decrypt and verify vsh package elapsed = 283 msec
write vsh package elapsed = 2912 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 432 msec
Update VSH's package : 13/22
read vsh package (9578659 bytes) elapsed = 821 msec
decrypt and verify vsh package elapsed = 360 msec
write vsh package elapsed = 4451 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 489 msec
Update VSH's package : 14/22
read vsh package (9212109 bytes) elapsed = 791 msec
decrypt and verify vsh package elapsed = 441 msec
write vsh package elapsed = 5692 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 456 msec
Update VSH's package : 15/22
read vsh package (8036686 bytes) elapsed = 692 msec
decrypt and verify vsh package elapsed = 389 msec
write vsh package elapsed = 6781 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 472 msec
Update VSH's package : 16/22
read vsh package (8982224 bytes) elapsed = 773 msec
decrypt and verify vsh package elapsed = 391 msec
write vsh package elapsed = 2736 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 466 msec
Update VSH's package : 17/22
read vsh package (8765613 bytes) elapsed = 761 msec
decrypt and verify vsh package elapsed = 355 msec
write vsh package elapsed = 5739 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 601 msec
Update VSH's package : 18/22
read vsh package (9577711 bytes) elapsed = 827 msec
decrypt and verify vsh package elapsed = 299 msec
write vsh package elapsed = 8109 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 612 msec
Update VSH's package : 19/22
read vsh package (8621592 bytes) elapsed = 746 msec
decrypt and verify vsh package elapsed = 262 msec
write vsh package elapsed = 7197 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 696 msec
Update VSH's package : 20/22
read vsh package (7232836 bytes) elapsed = 633 msec
decrypt and verify vsh package elapsed = 385 msec
write vsh package elapsed = 6379 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 594 msec
Update VSH's package : 21/22
read vsh package (7344037 bytes) elapsed = 644 msec
decrypt and verify vsh package elapsed = 272 msec
write vsh package elapsed = 1508 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 479 msec
Update VSH's package : 22/22
read vsh package (7945799 bytes) elapsed = 696 msec
decrypt and verify vsh package elapsed = 214 msec
write vsh package elapsed = 523 msec
flush_cache(0x001)
flush_cache() SUCCESS
compare vsh package elapsed = 376 msec
Update VSH Package done(0x)
Bul-ray Disc Player Revoke
read bdp revoke package (1775 bytes) elapsed = 6 msec
decrypt and verify bdp revoke package elapsed = 50 msec
write bdp revoke package elapsed = 1 msec
Bul-ray Disc Player Revoke done(0x)
update package elapsed time = 147314 msec
Updating or Verifying failure 0x
UpMng.UpdatePackage() failure
manufacturing updating FAILURE(0x)
Total Elapsed time = 176985 msec
战士, 积分 1193, 距离下一级还需 307 积分
精华0帖子威望0 点积分1193 点注册时间最后登录
OH，不知道怎麼的，在失敗無數次之後，成功了..........
Powered by
扫描二维码
下载 A9VG 客户端（iOS, Android）