如何保存speedfan对风扇转速的调整？
如何保存speedfan对风扇转速的调整？
如题，我用speedfan调整到合适的风扇转速后重启不保存。（怎么保存？）
另外有什么办法可以调节CPU风扇的转速，在BLOS里面我好像找不到类似调节风扇转速选项。
现在开机风扇转速达到了5200+转，非常响。
CPU型号：AMD7750
这CPU多少温度算正常？
补充：我的主板是：映泰 TA790GXB A2+/
可是不调他的转速不行吖，
风扇超级响，风扇快要飞出来的样子了
这CPU是新买的，可以确定排除灰尘问题
我用speedfan调整到3300转
满载温度才64度
可以说，是允许调节到3300转的
不需要担心散热不足
补充：问题已经解决
只要把Fan Ctrl Sensitive（每升1度提高的转数）改低就行
是这样的，BIOS里面可以设定风扇的速度，同时目前的风扇都支持VPM条速，通过CPU的MOS管的电压大小来调节速度的快慢，你没有必要调节的，完全是自动的，除非你的BIOS设置有问题才这样,如果你不怕导致cpu散热不充足的话 .你就继续弄吧
CPU60左右比较正常，如果达到了八十度，建议检查风扇，必要时更换。
以双核速龙4200+、4针原装风扇（3针的不支持调速）、A78GT为例：
1：首先安装好CPU双核补丁、补丁，并在选项选择“最小电源管理”。
2：开机进入BIOS，选择进入power，即配置；
（1）：在CPUFAN Mode Setting设置manual mode（即） ,cpufan 设置为100-150之间(默认250),这样风扇的就下降到之间,会小得多了,但是此扇并不是智能调节转速的,即转速是一定值!
（2）：设置智能调速，CPUFAN Target Temp valun（CPU风扇）--40
CPUFAN Tolerance value----03
CPUFAN Startup value（CPU风扇的启动数）---40，就是CPU温度达到40°后开始启动智能调速
CPUFAN STOP value（CPU风扇停止数）---35，即CPU温度到35°后停止调速，并随之降速!
他一开机就50度以上，
所以开机就很快
详细怎么调转速？
现在就是最少电源模式了
上面的100-150改成100-200
CPUFAN Startup value（CPU风扇的启动数）---65
就是CPU温度达到65°后开始启动智能调速
CPUFAN STOP value（CPU风扇停止数）---55
到55°后停止调速，并随之降速!
我已经在CPUFAN那里拍了
可是不知道这里怎么上传
提问者 的感言：谢谢你的耐心回答
问题已经解决
其他回答 (3)
AMD的CPU不超过60是没有问题的。。。响可能是灰尘多了吧。。。
你这个不可以调的，BIOS支持的话也只有两种模式，一种是SMART FAN（智能控制），另一种Full speed（始终全速）。这个不用改。SMART fan可以根据CPU温度调节转速。
保存，你也知道就是f10，保存不了的最好不要去改动！
他现在是智能控制
可是噪音超大的
全速就更不用说了
肯定不能挂机睡觉
首先要看你的主板是否支持风扇的控制，一般来说只要不是古董级的都有，新一点的会有智能控制，按温度自动调整，好好去看下你主板的说明书吧，上面都有。
CPU温度一般在38-50，只要不超过60都没什么问题，因季节，散热，等方面决定
忘记说明一点，AMN7750的原装风扇垃圾到了极点，前两天我帮我朋友配了个，看到那风扇就决定只吧它用做机箱上的散热
换个CPU风扇吧，推荐Tt的，65-75一个，铜芯的
正在考虑换风扇，
现在就看能不能限制风扇转速。能限制就不用换风扇了
等待您来回答
电脑常识领域专家SpeedFan for Windows 7 - Freeware monitors hardware - Windows 7 Download
SpeedFan 4.50
A freeware monitors hardware chips voltages, fan speeds, temperatures on PC
SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. info and show hard disk temperatures. SpeedFan supports SCSI disks too. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature).
File Size:
Downloads:
Total: 49236 | This Month: 50
Publisher:
Publisher URL:
User Rating: 4.0 (167 votes)
Currently 3.95/5
SpeedFan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. info and show hard disk temperatures. SpeedFan supports SCSI disks too. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature). SpeedFan can access digital temperature sensors and can change fan speeds accordingly, thus reducing noise. SpeedFan works fine with Windows 9x, ME, NT, , XP, Vista, Windows 7, 2008, Windows 8 and Windows Server 2012. It works with Windows 64 bit too.
SpeedFan 4.49 Final is online!
Added and verified full support for Windows 8 and Windows Server 2012. Improved ACPI support. Version 4.49 replaces version 4.48 (released just a few hours earlier) fixing a typo that caused ACPI temperatures to be reported wrongly on some Windows 7. The installer has changed its naming schema too, in order to avoid a boring "feature" of Windows that was reporting to SpeedFan's installer the wrong Windows version. Both the installer and the executable are digitally signed with my company's (SOKNO S.R.L.) certificate. ...Enjoy!
How fan speed changing works
SpeedFan monitor temperatures from several sources. By properly configuring SpeedFan, you can let it change fan speeds based on system temperatures. When choosing parameters for the minimum and maximum fan speed, try to set them by hand (disable all the VARIATE FANs checkboxes) and listen to the noise. When you hear no noise from the fan then you can set that value as the minimum fan speed for that fan. I suggest to use 100 as the maximum value, unless you hear a lot of noise from it, in which case you might reduce the maximum speed to 95 or 90. You can set, say, 60 as the maximum value and, sometimes, I myself set it that way. Consider that when the WARNING temperature is reached, the program sets the fan speed to 100, whatever maximum speed you selected. One last word should be said regarding the USE FAN x listbox. In my pc, more than one temperature changes when a fan runs faster. You can configure on which fan every temperature should rely. On my system, TEMP1 and TEMP3 are both influenced by FAN1.
A few numbers...
SpeedFan can handle:
* almost any number of South Bridges * almost any number of hardware monitor chips * almost any number of hard disks * almost any number of temperature readings * almost any number of voltage readings * almost any number of fan speed readings * almost any number of PWMs
Disclaimer
This program is aimed at the power user. At those who know what they're doing. I've known of no real problem caused by SpeedFan, but may be it's due to the fact that once it made the PC explode and the user disappeared in the blast, thus being unable to report :-) Anyway: SpeedFan can be extremely useful, but you should first watch its behavior before setting and forgetting it.
* The first one to thank is Alexander Van Kaam, for letting me discover the wonderful world of sensors * Carlo Adami, for his great work on AS99127F * Massimiliano Battaglia, for his infinite patience debugging and reporting * Istvan Dercze, for his help testing VIA686 support
New ReleaseAdded support for Intel core temperature (Family 06h Model 3Ch)
Added support for Intel core temperature (Family 06h Model 3Eh)
Added support for AMD Family 15h temperature
Added support for AMD Family 16h temperature
Added support for Intel 8 Series Mobile SMBus
Added Nuvoton NCT6779D/NCT6791D advanced option to choose between PWM and DC output for System Fan (PWM 1)
Changed the way NCT6779D and NCT6791D read fan speeds
Added 4 more temperature readings to NCT6779D
Added Fintek F71808A advanced setting: PWM TYPE 3
Refined Fintek F71808A description for PWM MODEs
Added preliminary support for ITE IT8620E temperatures and fan speeds
Fixed a minor typo that caused Fintek F71808A to not show some temperatures properly
Bookmark SpeedFan
Hyperlink code:
Hyperlink and Intro code:
Hyperlink for Forum code:
All SpeedFan reviews, submitted ratings and written comments become the sole property of Windows 7 download. You acknowledge that you, not windows7download, are responsible for the contents of your submission. However, windows7download reserves the right to remove or refuse to post any submission for any reason.
Windows 7 Download periodically updates pricing and software information of SpeedFan full version from the publisher,
but some information may be out-of-date. You should confirm all information.
Using warez version, crack, warez passwords, patches, serial numbers, registration codes, key generator, pirate key, keymaker or keygen for
SpeedFan license key is illegal and prevent future development of
SpeedFan. Download links are directly from our mirrors or publisher's website,
SpeedFan torrent or shared files from free file sharing and free upload services,
including Rapidshare, MegaUpload, YouSendIt, SendSpace, DepositFiles, DivShare, HellShare, HotFile, FileServe or MediaFire,
are not used.
review by James
(Jul 29, 2012)
Well, the program works like a charm, but it seems that it will not find my fan... So I can't change any settings regarding my fan speeds, and that is why I got the program. If anyone of you know a possible sollution mail me at: jamesp0078@hotmail.be
Thank you in advance
review by Ron Ahearn
(Oct 30, 2010)
Speedfan4.41 will not show SMART details on my new
win7 Pro install,worked OK on XP Pro last week, all hardware same.Beltec Adviser Idents.disks & gives Report ofHealthy.
Your Name:
Product Version:
3 - Usable
5 - Excellent
Security Code:
The Open Hardware Monitor is a free open source application that monitors ... clock speeds of a computer.
The Open Hardware Monitor supports most hardware monitoring chips found on todays
DiskMonitor enables a network administrator to monitor local and networked disks, graphically view usage history, receive
Thermod Digital is a simple utility that will help you monitor temperature of any AMD Family
... Center application was designed to be a MSI hardware monitor, overclock, fan and voltage control tool. Dynamic overclock
... different features in an user-friendly interface, which includes Hardware Monitor, Fan Control, Overclocking, OC DNA and IES. In
My Account
Windows 7 Software Coupons
My Saved Stuff
You have not saved any software.Click "Save" next to each software.
Would you like to receive announcements of new versions of your software by email or by RSS reader?
Windows 7 Downloads Picks
Popular Tags
Popular Windows 7 Software
(C) 2014 < - All logos, trademarks, art and other creative works are and remain copyright and property of their respective owners. Microsoft Windows is a registered trademarks of Microsoft Corporation. Microsoft Corporation in no way endorses or is affiliated .已有天涯账号？
这里是所提的问题，您需要登录才能参与回答。
"天涯问答"是天涯社区旗下的问题分享平台。在这里您可以提问，回答感兴趣的问题，分享知识和经历，无论您在何时何地上线都可以访问，此平台完全免费，而且注册非常简单。
软件Speedfan怎么设置？怎样才能减慢CPU风扇的转速？
软件Speedfan怎么设置？怎样才能减慢CPU风扇的转速？
09-10-13 & 发布
不快，除了上面这位朋友说的换CPU风扇外，还有另一个办法，就是你加装机箱风扇，一般的机箱风扇是8厘米的，如果你的机箱可以装12厘米的那更好，利于机箱内部的空气传送&/p&
请登录后再发表评论!