我这个配置怎么玩《上古卷轴5配置》最流畅

你的显卡能流畅运行吗?《上古卷轴5》简测 _17173单机站_中国游戏第一门户站
您当前所处的位置: >
你的显卡能流畅运行吗?《上古卷轴5》简测
最高特效,4x MSAA
最高特效下似乎连4GHz频率的Core i5-2500K都成了瓶颈,其他方面,GTX550Ti和HD5770勉强过关,相信AA方式如果变为FXAA可以更加流畅。
最高特效,4x MSAA+FXAA
和预想的情况一样,额外开启FXAA的情况下FPS下降的程度也很少,GTX460/Radeon HD 6850级别的显卡仍旧没有压力。
最高特效,4xMSAA+NVIDIA Transparent AA/AMD Adaptive AA
如果你不喜欢FXAA的纹理模糊效果,那么NVIDIA TrSSAA与AMD Adaptive AA提供了更清晰锐利的选择,当然要牺牲一部分性能,相对来说TrSSAA下降的性能更高,但角色移动时就能看出物体边缘更平滑。
两种AA都用上的情况下只有GeForce GTX 570与Radeon HD 6970级别的显卡才能提供完全流畅的游戏效果。
前面已经出现过Core i5-2500K成为瓶颈的情况,相信在不少情况下CPU频率对于游戏整体性能的影响更大。从测试结果来看,要想最高级别设置下最低帧数不跌落30FPS,那么你需要一块运行于3GHz的Sandy Bridge平台Core i3或3.5GHz的Phenom II。当然,次高(High)以及中等(Medium)级别对CPU的要求会宽松的多。
至于核心数量,由于游戏引擎对比2006年的版本没有大修,超过2线程对于性能的影响不大。
“啥?没有DX11曲面细分?都给我败啊!”
如果玩家想要以最高级别特效运行游戏,他们需要一颗Sandy Bridge Core i3以上级别的CPU,以及至少Radeon HD 6850级别的显卡,抑或选择双卡(NVIDIA在285.79驱动中加入了SLI对Skyrim的支持,AMD方面最新的11.11似乎还是遗忘了这点)
退一步选择次高级别特效与FXAA,即使GeForce GTX 550Ti与Radeon HD 外加2.5GHz以上的Phenom II也能流畅运行游戏。此外在更低的分辨率与特效档次中包括GeForce GT 430与Radeon HD 也有最低35fps的水平,并且画面档次与最高级别也不是一个天上一个地下。
梦幻之星P2 最终幻想:纷争 王国之心BBS
口袋妖怪 牧场物语 超级机器人大战W 符文工坊3
光环:致远星 暗黑血统 质量效应2 生化危机5
神秘海域2 最终幻想13 猎天使魔女
龙之子 Vs Capcom
 热点推荐
单机热门文章友情提示:支持键盘左右键“← →”翻页
分享次数:
游戏名称:上古卷轴5:天际
游戏制作:Bethesda
游戏发行:Bethesda
游戏平台:PC/Xbox360/PS3
上市时间:
游民指数:--
特色属性:  
······························
······························
热门游戏攻略推荐
近期游戏大作推荐
热点内容图文推荐
近期热点内容回顾
精彩视频推荐
Copyright&2003- All rights reserved. 游民星空 版权所有
冀ICP证B2- 冀网文[0号《上古卷轴5》mod光影模组介绍与配置教学(4)
  brightnessMultiplierDawn=1
  contrastMultiplierDawn=1
  redMultiplierDawn=1.25
  greenMultiplierDawn=1
  blueMultiplierDawn=1
  alphaMultiplierDawn=1
  DOFStrengthMultiplierDawn=1
  DOFDistanceMultiplierDawn=1
  DOFRangeMultiplierDawn=1
  DAWNMODIFIERS(拂晓)
  These are dawnmodifiers - they are added on (or subtracted) after the multiplication is done,and only affect the sunrise。
  Refer to theGlobal Multipliers section for definitions on each variable。
  eyeAdaptSpeedModDawn=0
  bloomRadiusModDawn=0
  bloomThresholdModDawn=0
  bloomScaleModDawn=0
  targetLum1ModDawn=0
  targetLum2ModDawn=0
  sunlightScaleModDawn=0
  skyScaleModDawn=0
  eyeAdaptStrengthModDawn=0
  saturationModDawn=0
  brightnessModDawn=0
  contrastModDawn=0
  redModDawn=0
  greenModDawn=0
  blueModDawn=0
  alphaModDawn=0
  DOFStrengthModDawn=0
  DOFDistanceModDawn=0
  DOFRangeModDawn=0
  DUSKMULTIPLIERS(黄昏)
  These are duskmultipliers - they multiply the value, and affect it only during the sunset。
  Refer to theGlobal Multipliers section for definitions on each variable。
  eyeAdaptSpeedMultiplierDusk=1
  bloomRadiusMultiplierDusk=1
  bloomThresholdMultiplierDusk=1
  bloomScaleMultiplierDusk=1
  targetLum1MultiplierDusk=1
  targetLum2MultiplierDusk=1
  sunlightScaleMultiplierDusk=1
  skyScaleMultiplierDusk=1
  eyeAdaptStrengthMultiplierDusk=1
  saturationMultiplierDusk=1.3
  brightnessMultiplierDusk=1
  contrastMultiplierDusk=1
  redMultiplierDusk=1.45
  greenMultiplierDusk=0.9
  blueMultiplierDusk=1
  alphaMultiplierDusk=1
  DOFStrengthMultiplierDusk=1
  DOFDistanceMultiplierDusk=1
  DOFRangeMultiplierDusk=1
  DUSKMODIFIERS(黄昏)
  These are duskmodifiers - they are added on (or subtracted) after the multiplication is done,and only affect the sunset。
  Refer to theGlobal Multipliers section for definitions on each variable。
  eyeAdaptSpeedModDusk=0
  bloomRadiusModDusk=0
  bloomThresholdModDusk=0
  bloomScaleModDusk=0
  targetLum1ModDusk=0
  targetLum2ModDusk=0
  sunlightScaleModDusk=0
  skyScaleModDusk=0
  eyeAdaptStrengthModDusk=0
  saturationModDusk=0
  brightnessModDusk=0
  contrastModDusk=0
  redModDusk=0
  greenModDusk=0
  blueModDusk=0
  alphaModDusk=0
  DOFStrengthModDusk=0
  DOFDistanceModDusk=0
  DOFRangeModDusk=0
  INTERIORMULTIPLIERS(室内)
  These areinterior multipliers - they multiply the value, and affect only the interiors。
  Refer to theGlobal Multipliers section for definitions on each variable。
  eyeAdaptSpeedMultiplierInterior=1
  bloomRadiusMultiplierInterior=1
  bloomThresholdMultiplierInterior=1
  bloomScaleMultiplierInterior=1
  targetLum1MultiplierInterior=1
  targetLum2MultiplierInterior=1.35
  sunlightScaleMultiplierInterior=0.25
  skyScaleMultiplierInterior=0.25
  eyeAdaptStrengthMultiplierInterior=1
  saturationMultiplierInterior=1
  brightnessMultiplierInterior=1.25(这里我直接改成了1.5,太暗了,真心受不了)
    [4]  
& 15:46:44
& 15:43:40
& 14:03:40
& 17:10:42
& 16:12:34
& 14:13:52
& 14:13:52
Copyright &
SINA Corporation, All Rights Reserved这配置能玩《看门狗》《上古卷轴5》《使命召唤11》《古墓丽影9》《战神3》吗_百度知道
提问者采纳
显卡都没有给出,战神3是PS独占游戏,怎么看,就算有Titan也不能玩,没有PC版,
哦,显卡在哪看
系统属性---设备管理器
看门狗,使命召唤11不用想了,最低都没达到,上古5配置亲民能够玩
古墓丽影9呢?
提问者评价
太给力了,你的回答完美地解决了我的问题,非常感谢!
其他类似问题
等待您来回答
下载知道APP
随时随地咨询
出门在外也不愁

我要回帖

更多关于 上古卷轴5配置 的文章

 

随机推荐