注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
如题，
lshal中可以看到其他分区的信息
引用:
block.device = '/dev/sda'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda'
block.device = '/dev/sda4'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda4'
block.device = '/dev/sda9'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9'
block.device = '/dev/sda8'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8'
block.device = '/dev/sda7'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7'
block.device = '/dev/sda6'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6'
block.device = '/dev/sda5'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5'
block.device = '/dev/sda2'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda2'
block.device = '/dev/sda3'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda3'
block.device = '/dev/sda10'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10'
block.device = '/dev/sda1'
linux.sysfs_path = '/sys/devices/pci0:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1'
99-storage-policy-fixed-drives.fdi这个文件我复制到了/etc/hal/fid/policy/下并且已改
引用:
&?xml version="1.0" encoding="UTF-8"?& &!-- -*- SGML -*- --&
&deviceinfo version="0.2"&
&device&
&match key="@block.storage_device:storage.hotpluggable" bool="false"&
&match key="@block.storage_device:storage.removable" bool="false"&
&merge key="volume.ignore" type="bool"&false&/merge&
&/match&
&/device&
&/deviceinfo&
注册时间 12:13:56
最后登录 23:45:49
用户头衔：注册会员
状态：我不在线
别忘了把自己加入plugdev组，安装hal的时候有提示。
注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
2028106 说:别忘了把自己加入plugdev组，安装hal的时候有提示。
已经加入了的
注册时间 13:53:49
最后登录18小时55分钟前
用户头衔：注册会员
状态：我不在线
为什么不用/etc/fstab?移动硬盘?
注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
M2028124 说:为什么不用/etc/fstab?移动硬盘?
只是记得有天的某次hal自动挂载了，
移动硬盘也是可以自动挂载的，
应该是hal没有把他们当作活动分区，但是我明明改了99那个文件的
注册时间 21:02:26
最后登录 21:06:02
用户头衔：注册会员
状态：我不在线
看一看这篇文章吧，也许有些帮助：我也是用KDE4桌面，被U盘不能自动挂载的问题困扰着，目前还没有找到比较好的解决办法。另：把dmesg和gzip -dc /proc/config.gz也贴出来看看。
编译器是英雄胆！
注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
我发现hal其实已经找到了, 只是没有自动挂载上, 在我这里插上一个U盘, 然后在dolphin左面列表会出来盘符, 右键显示全部, 就可以看到其它分区, 点一下就自动挂载上了....
注册时间 21:02:26
最后登录 21:06:02
用户头衔：注册会员
状态：我不在线
newsky_兄，还是麻烦把dmesg和gzip -dc /proc/config.gz贴一下吧，我好参照改一改。多谢，多谢。
编译器是英雄胆！
注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
dmesg引用: - f]
BOOTMAP ==& [ - ]Zone PFN ranges:
0x -& 0x000377fe
0x000377fe -& 0x00079c00Movable zone start PFN for each nodeearly_node_map[5] active PFN ranges
0: 0x -& 0x0000009e
0: 0x -& 0x
0: 0x -& 0x
0: 0x0007980f -& 0x
0: 0x00079bff -& 0x00079c00On node 0 totalpages: 497672free_area_init_node: node 0, pgdat c151e480, node_mem_map c15b1000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3966 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2121 pages used for memmap
HighMem zone: 268323 pages, LIFO batch:31Using APIC driver defaultACPI: PM-Timer IO Port: 0x1008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)ACPI: IRQ0 used by override.ACPI: IRQ2 used by override.ACPI: IRQ9 used by override.Enabling APIC mode:
Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration information4 Processors exceeds NR_CPUS limit of 2SMP: Allowing 2 CPUs, 0 hotplug CPUsnr_irqs_gsi: 24PM: Registered nosave memory: e000 - f000PM: Registered nosave memory: f000 - a0000PM: Registered nosave memory: a0000 - dc000PM: Registered nosave memory: dc000 - 0000Allocating PCI resources starting at 7c000000 (gap: 7c00000)NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1PERCPU: Embedded 12 pages at c24f3000, static data 28124 bytesBuilt 1 zonelists in Zone order, mobility grouping on.
Total pages: 493775Kernel command line: root=/dev/sda9 acpi_sleep=s3_bios,s3_mode acpi_osi="Linux" thinkpad_acpi.fan_control=1 quiet video=uvesafb:@60,ywrap,mtrr:3 ramdisk=2048 splash=silent,fadein,theme:livecd-2007.0 console=tty1 ACPI: Added _OSI(Linux)PID hash table entries: 4096 (order: 12, 16384 bytes)Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0Initializing HighMem for node 0 (000377fe:00079c00)Memory: 94752k available (3787k kernel code, 22836k reserved, 1471k data, 328k init, 1081776k highmem)virtual kernel memory layout:
: 0xfff91000 - 0xfffff000
: 0xff800000 - 0xffc00000
vmalloc : 0xf7ffe000 - 0xff7fe000
: 0xc0000000 - 0xf77fe000
.init : 0xc1523000 - 0xc1575000
.data : 0xc13b2d10 - 0xc1522a78
.text : 0xc1000000 - 0xc13b2d10
(3787 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1NR_IRQS:320Extended CMOS year: 2000Fast TSC calibration using PITDetected
MHz processor.Console: colour VGA+ 80x25console [tty1] enabledCalibrating delay loop (skipped), value calculated using timer frequency.. 4788.44 BogoMIPS (lpj=2394220)Mount-cache hash table entries: 512CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0mce: CPU supports 6 MCE banksusing mwait in idle threads.Performance Counters: Core2 events, Intel PMU driver.... version:
2... bit width:
40... generic counters:
2... value mask:
000000ffffffffff... max period:
fffffff... fixed-purpose counters:
3... counter mask:
0003Checking 'hlt' instruction... OK.ACPI: Core revision ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1CPU0: Intel(R) Core(TM)2 Duo CPU
@ 2.40GHz stepping 06Booting processor 1 APIC 0x1 ip 0x6000Initializing CPU#1Calibrating delay using timer specific routine.. 4787.17 BogoMIPS (lpj=2393585)CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 3072KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1mce: CPU supports 6 MCE banksCPU1: Intel(R) Core(TM)2 Duo CPU
@ 2.40GHz stepping 06checking TSC synchronization [CPU#0 -& CPU#1]: passed.Brought up 2 CPUsTotal of 2 processors activated (9575.61 BogoMIPS).NET: Registered protocol family 16ACPI FADT declares the system doesn't support PCIe ASPM, so disable itACPI: bus type pci registeredPCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63PCI: MCFG area at e0000000 reserved in E820PCI: Using MMCONFIG for extended config spacePCI: Using configuration type 1 for base accessbio: create slab &bio-0& at 0ACPI: EC: EC description table is found, configuring boot ECACPI: BIOS _OSI(Linux) query honored via cmdlineACPI: EC: non-query interrupt received, switching to interrupt modeACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62ACPI: EC: driver started in interrupt modeACPI: Power Resource [PUBS] (on)ACPI: ACPI Dock Station Driver: 3 docks/bays foundACPI: PCI Root Bridge [PCI0] (0000:00)pci .0: reg 10 64bit mmio: [0xfxf23fffff]pci .0: reg 18 64bit mmio: [0xdxdfffffff]pci .0: reg 20 io port: [0x7]pci .1: reg 10 64bit mmio: [0xfxf24fffff]pci .0: reg 10 64bit mmio: [0xfxf282680f]pci .0: PME# supported from D0 D3hot D3coldpci .0: PME# disabledpci .2: reg 10 io port: [0xf]pci .2: reg 14 io port: [0x180c-0x180f]pci .2: reg 18 io port: [0x7]pci .2: reg 1c io port: [0xb]pci .2: reg 20 io port: [0xf]pci .3: reg 10 io port: [0x7]pci .3: reg 14 32bit mmio: [0xfxf2624fff]pci .0: reg 10 32bit mmio: [0xfxf261ffff]pci .0: reg 14 32bit mmio: [0xfxf2625fff]pci .0: reg 18 io port: [0xf]pci .0: PME# supported from D0 D3hot D3coldpci .0: PME# disabledpci a.0: reg 20 io port: [0xf]pci a.1: reg 20 io port: [0xf]pci a.2: reg 20 io port: [0x18a0-0x18bf]pci a.7: reg 10 32bit mmio: [0xfxf2826fff]pci a.7: PME# supported from D0 D3hot D3coldpci a.7: PME# disabledpci b.0: reg 10 64bit mmio: [0xfxf2623fff]pci b.0: PME# supported from D0 D3hot D3coldpci b.0: PME# disabledpci c.0: PME# supported from D0 D3hot D3coldpci c.0: PME# disabledpci c.1: PME# supported from D0 D3hot D3coldpci c.1: PME# disabledpci c.3: PME# supported from D0 D3hot D3coldpci c.3: PME# disabledpci d.0: reg 20 io port: [0x18c0-0x18df]pci d.1: reg 20 io port: [0x18e0-0x18ff]pci d.2: reg 20 io port: [0x1c00-0x1c1f]pci d.7: reg 10 32bit mmio: [0xfxf28273ff]pci d.7: PME# supported from D0 D3hot D3coldpci d.7: PME# disabledpci f.2: reg 10 io port: [0x1c48-0x1c4f]pci f.2: reg 14 io port: [0x183c-0x183f]pci f.2: reg 18 io port: [0x1c40-0x1c47]pci f.2: reg 1c io port: [0xb]pci f.2: reg 20 io port: [0x1c20-0x1c3f]pci f.2: reg 24 32bit mmio: [0xfxf28267ff]pci f.2: PME# supported from D3hotpci f.2: PME# disabledpci f.3: reg 10 64bit mmio: [0xfxf28274ff]pci f.3: reg 20 io port: [0x1c60-0x1c7f]pci .0: reg 10 64bit mmio: [0xfxf2501fff]pci .0: PME# supported from D0 D3hot D3coldpci .0: PME# disabledpci c.1: bridge 32bit mmio: [0xfxf25fffff]pci c.3: bridge io port: [0xfff]pci c.3: bridge 32bit mmio: [0xfxf1ffffff]pci c.3: bridge 64bit mmio pref: [0xfxf29fffff]pci e.0: transparent bridgepci_bus 0000:00: on NUMA node 0ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)SCSI subsystem initializedlibata version 3.00 loaded.usbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbPCI: Using ACPI for IRQ routingcfg80211: Calling CRDA to update world regulatory domainpnp: PnP ACPI initACPI: bus type pnp registeredpnp: PnP ACPI: found 10 devicesACPI: ACPI bus type pnp unregisteredsystem 00:00: iomem range 0x0-0x9ffff could not be reservedsystem 00:00: iomem range 0xcfff could not be reservedsystem 00:00: iomem range 0xcfff could not be reservedsystem 00:00: iomem range 0xc8000-0xcbfff has been reservedsystem 00:00: iomem range 0xcc000-0xcffff has been reservedsystem 00:00: iomem range 0xdfff could not be reservedsystem 00:00: iomem range 0xdc000-0xdffff could not be reservedsystem 00:00: iomem range 0xefff could not be reservedsystem 00:00: iomem range 0xefff could not be reservedsystem 00:00: iomem range 0xe8000-0xebfff could not be reservedsystem 00:00: iomem range 0xec000-0xeffff could not be reservedsystem 00:00: iomem range 0xf0000-0xfffff could not be reservedsystem 00:00: iomem range 0xx7bffffff could not be reservedsystem 00:00: iomem range 0xfec00000-0xfed3ffff could not be reservedsystem 00:00: iomem range 0xfed4c000-0xffffffff could not be reservedsystem 00:02: ioport range 0xf has been reservedsystem 00:02: ioport range 0xff has been reservedsystem 00:02: ioport range 0x800-0x80f has been reservedsystem 00:02: ioport range 0x15e0-0x15ef has been reservedsystem 00:02: ioport range 0xf has been reservedsystem 00:02: ioport range 0xf has been reservedsystem 00:02: iomem range 0xexefffffff has been reservedsystem 00:02: iomem range 0xfed1c000-0xfed1ffff has been reservedsystem 00:02: iomem range 0xfed10000-0xfed13fff has been reservedsystem 00:02: iomem range 0xfed18000-0xfed18fff has been reservedsystem 00:02: iomem range 0xfed19000-0xfed19fff has been reservedsystem 00:02: iomem range 0xfed45000-0xfed4bfff has been reservedpci c.0: PCI bridge, secondary bus 0000:02pci c.0:
IO window: disabledpci c.0:
MEM window: disabledpci c.0:
PREFETCH window: disabledpci c.1: PCI bridge, secondary bus 0000:03pci c.1:
IO window: disabledpci c.1:
MEM window: 0xfxf25fffffpci c.1:
PREFETCH window: disabledpci c.3: PCI bridge, secondary bus 0000:05pci c.3:
IO window: 0xfffpci c.3:
MEM window: 0xfxf1ffffffpci c.3:
PREFETCH window: 0x000f29fffffpci e.0: PCI bridge, secondary bus 0000:0dpci e.0:
IO window: disabledpci e.0:
MEM window: disabledpci e.0:
PREFETCH window: disabledpci c.0: PCI INT A -& GSI 20 (level, low) -& IRQ 20pci c.0: setting latency timer to 64pci c.1: PCI INT B -& GSI 21 (level, low) -& IRQ 21pci c.1: setting latency timer to 64pci c.3: PCI INT D -& GSI 23 (level, low) -& IRQ 23pci c.3: setting latency timer to 64pci e.0: setting latency timer to 64pci_bus 0000:00: resource 0 io:
[0x00-0xffff]pci_bus 0000:00: resource 1 mem: [0xxffffffff]pci_bus 0000:03: resource 1 mem: [0xfxf25fffff]pci_bus 0000:05: resource 0 io:
[0xfff]pci_bus 0000:05: resource 1 mem: [0xfxf1ffffff]pci_bus 0000:05: resource 2 pref mem [0xfxf29fffff]pci_bus 0000:0d: resource 3 io:
[0x00-0xffff]pci_bus 0000:0d: resource 4 mem: [0xxffffffff]NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredNET: Registered protocol family 1Trying to unpack rootfs image as initramfs...Freeing initrd memory: 466k freedSimple Boot Flag at 0x35 set to 0x1microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60cmicrocode: CPU1 sig=0x10676, pf=0x80, revision=0x60cMicrocode Update Driver: v2.00 &tigran@aivazian.fsnet.co.uk&, Peter Orubahighmem bounce pool size: 64 pagesNTFS driver 2.1.29 [Flags: R/W].fuse init (API version 7.12)msgmni has been set to 1731alg: No test for stdrng (krng)io scheduler noop registeredio scheduler cfq registered (default)pci .0: Boot video devicepcieport-driver c.0: setting latency timer to 64pcieport-driver c.1: setting latency timer to 64pcieport-driver c.3: setting latency timer to 64pci_hotplug: PCI Hot Plug PCI Core version: 0.5acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5decode_hpp: Could not get hotplug parameters. Use defaultsacpiphp: Slot [1] registeredNon-volatile memory driver v1.3Linux agpgart interface v0.103agpgart-intel .0: Intel Mobile Intel(R) GM45 Express Chipsetagpgart-intel .0: detected 32764K stolen memoryagpgart-intel .0: AGP aperture is 256M @ 0xd0000000ACPI: AC Adapter [AC] (on-line)input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0ACPI: Power Button [PWRF]input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1ACPI: Lid Switch [LID]input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2ACPI: Sleep Button [SLPB]ACPI: SSDT 798d7c20 002C8 (v01
INTL )ACPI: SSDT 798dA (v01
INTL )Monitor-Mwait will be used to enter C-1 stateMonitor-Mwait will be used to enter C-2 stateMonitor-Mwait will be used to enter C-3 stateMarking TSC unstable due to TSC halts in idleACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])processor LNXCPU:00: registered as cooling_device0ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: SSDT 798d6ca0 001CF (v01
INTL )ACPI: SSDT 798d6f20 0008D (v01
INTL )Switched to NOHz mode on CPU #0Switched to NOHz mode on CPU #1ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])processor LNXCPU:01: registered as cooling_device1ACPI: Processor [CPU1] (supports 8 throttling states)thermal LNXTHERM:01: registered as thermal_zone0ACPI: Thermal Zone [THM0] (50 C)thermal LNXTHERM:02: registered as thermal_zone1ACPI: Thermal Zone [THM1] (46 C)[drm] Initialized drm 1.1.0 i915 .0: power state changed by ACPI to D0i915 .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16i915 .0: setting latency timer to 64[drm] MTRR allocation failed.
Graphics performance may suffer.ACPI: Battery Slot [BAT0] (battery present)[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-Di2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID data[drm] LVDS-8: set mode
cConsole: switching to colour frame buffer device 160x50fbcondecor: console 0 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 0[drm] fb0: inteldrmfb frame buffer deviceacpi device:03: registered as cooling_device2input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input3ACPI: Video Device [VID] (multi-head: yes
post: no)[drm] Initialized i915 1.6.0
for .0 on minor 0Serial:
driver, 4 ports, IRQ sharing enabledserial .3: PCI INT B -& GSI 17 (level, low) -& IRQ 17.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550Abrd: module loadedloop: module loadedahci f.2: version 3.0ahci f.2: PCI INT B -& GSI 16 (level, low) -& IRQ 16ahci: SSS flag set, parallel bus scan disabledahci f.2: AHCI
slots 4 ports 3 Gbps 0x3 impl SATA modeahci f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ahci f.2: setting latency timer to 64scsi0 : ahciscsi1 : ahciscsi2 : ahciscsi3 : ahciata1: SATA max UDMA/133 abar m26000 port 0xf2826100 irq 16ata2: SATA max UDMA/133 abar m26000 port 0xf2826180 irq 16ata3: DUMMYata4: DUMMYe1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2e1000e: Copyright (c)
Intel Corporation.e:00:19.0: PCI INT A -& GSI 20 (level, low) -& IRQ 20e:00:19.0: setting latency timer to 64.0: .0: Failed to initialize MSI interrupts.
Falling back to legacy interrupts..0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:16:e9:d3.0: eth0: Intel(R) PRO/1000 Network Connection.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ffiwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ksiwlagn: Copyright(c)
Intel Corporationiwlagn .0: PCI INT A -& GSI 17 (level, low) -& IRQ 17iwlagn .0: setting latency timer to 64iwlagn .0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54iwlagn .0: Tunable channels: 13 802.11bg, 24 802.11a channelsphy0: Selected rate control algorithm 'iwl-agn-rs'ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driverehci_hcd a.7: power state changed by ACPI to D0ehci_hcd a.7: PCI INT D -& GSI 23 (level, low) -& IRQ 23ehci_hcd a.7: setting latency timer to 64ehci_hcd a.7: EHCI Host Controllerehci_hcd a.7: new USB bus registered, assigned bus number 1ehci_hcd a.7: debug port 1ehci_hcd a.7: cache line size of 32 is not supportedehci_hcd a.7: irq 23, io mem 0xf2826c00ehci_hcd a.7: USB 2.0 started, EHCI 1.00usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 6 ports detectedehci_hcd d.7: power state changed by ACPI to D0ehci_hcd d.7: PCI INT D -& GSI 19 (level, low) -& IRQ 19ehci_hcd d.7: setting latency timer to 64ehci_hcd d.7: EHCI Host Controllerehci_hcd d.7: new USB bus registered, assigned bus number 2ehci_hcd d.7: debug port 1ehci_hcd d.7: cache line size of 32 is not supportedehci_hcd d.7: irq 19, io mem 0xf2827000Monitor-Mwait will be used to enter C-3 stateehci_hcd d.7: USB 2.0 started, EHCI 1.00usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 6 ports detecteduhci_hcd: USB Universal Host Controller Interface driveruhci_hcd a.0: power state changed by ACPI to D0uhci_hcd a.0: PCI INT A -& GSI 20 (level, low) -& IRQ 20uhci_hcd a.0: setting latency timer to 64uhci_hcd a.0: UHCI Host Controlleruhci_hcd a.0: new USB bus registered, assigned bus number 3uhci_hcd a.0: irq 20, io base 0xusb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 2 ports detecteduhci_hcd a.1: PCI INT B -& GSI 21 (level, low) -& IRQ 21uhci_hcd a.1: setting latency timer to 64uhci_hcd a.1: UHCI Host Controlleruhci_hcd a.1: new USB bus registered, assigned bus number 4uhci_hcd a.1: irq 21, io base 0xusb usb4: configuration #1 chosen from 1 choicehub 4-0:1.0: USB hub foundhub 4-0:1.0: 2 ports detecteduhci_hcd a.2: power state changed by ACPI to D0uhci_hcd a.2: PCI INT C -& GSI 22 (level, low) -& IRQ 22uhci_hcd a.2: setting latency timer to 64uhci_hcd a.2: UHCI Host Controlleruhci_hcd a.2: new USB bus registered, assigned bus number 5uhci_hcd a.2: irq 22, io base 0xusb usb5: configuration #1 chosen from 1 choicehub 5-0:1.0: USB hub foundhub 5-0:1.0: 2 ports detecteduhci_hcd d.0: power state changed by ACPI to D0uhci_hcd d.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16uhci_hcd d.0: setting latency timer to 64uhci_hcd d.0: UHCI Host Controlleruhci_hcd d.0: new USB bus registered, assigned bus number 6uhci_hcd d.0: irq 16, io base 0xusb usb6: configuration #1 chosen from 1 choicehub 6-0:1.0: USB hub foundhub 6-0:1.0: 2 ports detecteduhci_hcd d.1: PCI INT B -& GSI 17 (level, low) -& IRQ 17uhci_hcd d.1: setting latency timer to 64uhci_hcd d.1: UHCI Host Controlleruhci_hcd d.1: new USB bus registered, assigned bus number 7uhci_hcd d.1: irq 17, io base 0xusb usb7: configuration #1 chosen from 1 choicehub 7-0:1.0: USB hub foundhub 7-0:1.0: 2 ports detecteduhci_hcd d.2: PCI INT C -& GSI 18 (level, low) -& IRQ 18uhci_hcd d.2: setting latency timer to 64uhci_hcd d.2: UHCI Host Controlleruhci_hcd d.2: new USB bus registered, assigned bus number 8uhci_hcd d.2: irq 18, io base 0x00001c00usb usb8: configuration #1 chosen from 1 choicehub 8-0:1.0: USB hub foundhub 8-0:1.0: 2 ports detectedInitializing USB Mass Storage driver...usbcore: registered new interface driver usb-storageUSB Mass Storage support registered.PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all micertc_cmos 00:07: RTC can wake from S4rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0rtc0: alarms up to one month, y3k, 114 bytes nvrami2c /dev entries driveri801_smbus f.3: PCI INT A -& GSI 23 (level, low) -& IRQ 23input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4cpuidle: using governor laddercpuidle: using governor menuusbcore: registered new interface driver usbhidusbhid: v2.6:USB HID core driverthinkpad_acpi: ThinkPad ACPI Extras v0.23thinkpad_acpi: thinkpad_acpi: ThinkPad BIOS 6DET53WW (3.03 ), EC 7XHT22WW-1.04thinkpad_acpi: Lenovo ThinkPad X200, model 7458AJ7thinkpad_acpi: radios are enabledthinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driverthinkpad_acpi: Disabling thinkpad-acpi brightness events by default...Registered led device: tpacpi::thinklightRegistered led device: tpacpi:owerRegistered led device: tpacpi::standbyRegistered led device: tpacpi::thinkvantagethinkpad_acpi: Standard ACPI backlight interface available, not loading native one.input: ThinkPad Extra Buttons as /devices/virtual/input/input5Advanced Linux Sound Architecture Driver Version 1.0.20.HDA Intel b.0: PCI INT B -& GSI 17 (level, low) -& IRQ 17HDA Intel b.0: setting latency timer to 64ALSA device list:
#0: HDA Intel at 0xf2620000 irq 17TCP cubic registeredNET: Registered protocol family 17lib80211: common routines for IEEE802.11 driverslib80211_crypt: registered algorithm 'NULL'Using IPI No-Shortcut modeata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeededata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered outata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered outata1.00: ATA-8: WDC WD2500BEVS-08VAT1, 13.01A13, max UDMA/133ata1.00:
sectors, multi 16: LBA48 NCQ (depth 31/32)ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeededata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered outata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeededata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered outata1.00: configured for UDMA/133ata1.00: configured for UDMA/133ata1: EH completescsi 0:0:0:0: Direct-Access
WDC WD2500BEVS-0 13.0 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 2-byte logical blocks: (250 GB/232 GiB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 & sda5 sda6 sda7 sda8 sda9 sda10 &sd 0:0:0:0: [sda] Attached SCSI diskusb 1-6: new high speed USB device using ehci_hcd and address 3usb 1-6: configuration #1 chosen from 1 choiceIBM TrackPoint firmware: 0x0e, buttons: 3/3input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6ata2: SATA link down (SStatus 0 SControl 300)EXT2-fs: sda9: couldn't mount because of unsupported optional features (240).EXT4-fs (sda9): barriers enabledkjournald2 starting: pid 819, dev sda9:8, commit interval 5 secondsEXT4-fs (sda9): delayed allocation enabledEXT4-fs: file extents enabledEXT4-fs: mballoc enabledEXT4-fs (sda9): mounted filesystem with ordered data modeVFS: Mounted root (ext4 filesystem) readonly on device 8:9.Freeing unused kernel memory: 328k freedusb 4-1: new full speed USB device using uhci_hcd and address 2usb 4-1: configuration #1 chosen from 1 choiceusb 6-1: new low speed USB device using uhci_hcd and address 2usb 6-1: configuration #1 chosen from 1 choiceinput: HID 04b3:3107 as /devices/pci0:00:1d.0/usb6/6-1/6-1:1.0/input/input7generic-usb :: input: USB HID v11.10 Mouse [HID 04b3:3107] on usb-d.0-1/input0Clocksource tsc unstable (delta = - ns)udev: starting version 145EXT4-fs (sda9): internal journal on sda9:8EXT4-fs (sda10): barriers enabledkjournald2 starting: pid 1317, dev sda10:8, commit interval 5 secondsEXT4-fs (sda10): internal journal on sda10:8EXT4-fs (sda10): delayed allocation enabledEXT4-fs: file extents enabledEXT4-fs: mballoc enabledEXT4-fs (sda10): mounted filesystem with ordered data modefbcondecor: console 1 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 1fbcondecor: console 2 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 2fbcondecor: console 3 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 3fbcondecor: console 4 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 4fbcondecor: console 5 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 5thinkpad_ec: thinkpad_ec 0.40 loaded.tp_smapi 0.40 loading...tp_smapi successfully loaded (smapi_port=0xb2).hdaps: initial mode latch is 0x05hdaps: setting ec_rate=250, filter_order=2hdaps: device successfully initialized.input: ThinkPad HDAPS joystick emulation as /devices/virtual/input/input8input: ThinkPad HDAPS accelerometer data as /devices/virtual/input/input9hdaps: driver successfully loaded.thinkpad_acpi: procfs hotkey enable/disable: access by process with PID 2083------------[ cut here ]------------WARNING: at drivers/platform/x86/thinkpad_acpi.c:3312 hotkey_enabledisable_warn+0x4c/0x60()Hardware name: 7458AJ7thinkpad_acpi: hotkey enable/disable functionality has been removed from the driver.
Hotkeys are always enabledModules linked in: hdaps tp_smapi thinkpad_ecPid: 2083, comm: runscript.sh Not tainted 2.6.31-gentoo #22Call Trace: [&c102780e&] ? warn_slowpath_common+0x6e/0xb0 [&c12fb0dc&] ? hotkey_enabledisable_warn+0x4c/0x60 [&c102789b&] ? warn_slowpath_fmt+0x2b/0x30 [&c12fb0dc&] ? hotkey_enabledisable_warn+0x4c/0x60 [&c12fb190&] ? hotkey_write+0xa0/0x1e0 [&c12fb53c&] ? dispatch_procfs_write+0x5c/0xc0 [&c12fb56a&] ? dispatch_procfs_write+0x8a/0xc0 [&c10c7166&] ? proc_file_write+0x56/0x80 [&c10c7110&] ? proc_file_write+0x0/0x80 [&c10c32fd&] ? proc_reg_write+0x5d/0x90 [&c10c32a0&] ? proc_reg_write+0x0/0x90 [&c10894d8&] ? vfs_write+0xa8/0x170 [&c1019b3c&] ? do_page_fault+0xec/0x2f0 [&c1089661&] ? sys_write+0x41/0x70 [&c1002e88&] ? sysenter_do_call+0x12/0x26---[ end trace b95ba21 ]---i2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datae1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX.0: eth0: 10/100 speed: disabling TSOi2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-2: unable to read EDID block.i915 .0: DVI-D-1: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datai2c-adapter i2c-4: unable to read EDID block.i915 .0: DVI-D-2: no EDID datafbcondecor: console 0 using theme 'livecd-;fbcondecor: switched decor state to 'on' on console 0至于 config.gz 我内核中没开此项
注册时间 21:02:26
最后登录 21:06:02
用户头衔：注册会员
状态：我不在线
/usr/src/linux下面的.config也可以，感谢。
编译器是英雄胆！
注册时间 18:19:10
最后登录 21:39:53
用户头衔：注册会员
状态：我不在线
2028851 说:/usr/src/linux下面的.config也可以，感谢。
在这里了，～～
上传的缩略图大小:49.78KB
注册时间 21:02:26
最后登录 21:06:02
用户头衔：注册会员
状态：我不在线
终于，我也搞定了U盘的自动挂载了。
以前挂载fat32格式的U盘的时候，老是失败。
CONFIG_FAT_DEFAULT_CODEPAGE=936
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
这两项不能为空，我在以前配置内核的时候，把CONFIG_FAT_DEFAULT_IOCHARSET=置空了。
如今，加上CONFIG_FAT_DEFAULT_IOCHARSET="cp936"，重新genkernel就OK了。
貌似，随然mount的vfat的时候制定-o utf8会忽略codepage和iocharset的设置（我手工mount一个vfat试过，指定了iocharset以后，不指定utf8和指定utf8的挂在效果是不一样的，在utf8的locale下，前者是乱码，后者就显示正常的汉字了），但是却必须指定这两个参数。如果不指定的话，就会提示no found。
虽然可以在/etc/hal/fdi/policy/storage-vfat.fdi中merge key一个iocharset=cp936，但是KDE4的kdebase-runtime中的kioslave组件只能识别utf8挂载选项，不能识别iocharset和codepage。见，里面有源代码为证的。
所以如果kernel中，如果忽略了CONFIG_FAT_DEFAULT_CODEPAGE
和CONFIG_FAT_DEFAULT_IOCHARSET的设置，即是在hal中添加了，也导致KDE挂载U盘的时候失败，因为hal仅提供设备属性（lshal能看到对应设备出现了iocharset和codepage属性），真正的挂载动作还是KDE执行的，KDE的kioslave天生没有识别并指定iocharset和codepage的能力，在挂载的时候就永远不会指定iocharset和codepage挂载参数，导致挂载失败，其中内核配置的时候哪个没设置，就会在dmesg中提示哪个no found。
多谢newsky_老兄的大力支持，终于我走出迷宫了。
编译器是英雄胆！
Processed in : 0.082000 second(s) (C)2014LinuxSir -