扫扫二维码，随身浏览文档
手机或平板扫扫即可继续访问
大气等离子喷涂粒子氧化及其对热障涂层性能影响研究
举报该文档为侵权文档。
举报该文档含有违规或不良信息。
反馈该文档无法正常浏览。
举报该文档为重复文档。
推荐理由：
将文档分享至：
分享完整地址
文档地址：
粘贴到BBS或博客
flash地址：
支持嵌入FLASH地址的网站使用
html代码：
&embed src='/DocinViewer-4.swf' width='100%' height='600' type=application/x-shockwave-flash ALLOWFULLSCREEN='true' ALLOWSCRIPTACCESS='always'&&/embed&
450px*300px480px*400px650px*490px
支持嵌入HTML代码的网站使用
您的内容已经提交成功
您所提交的内容需要审核后才能发布，请您等待！
3秒自动关闭窗口&&&大气等离子
的翻译结果:
查询用时：1.251秒
&在分类学科中查询
The NiCrBSi coating with 89.2% amorphous phase was prepared on the mild steel substrate by air plasma spraying.
采用大气等离子喷涂在低碳钢基底上制备了含有89.2%非晶的NiCrBSi涂层。
Nanostructured thermal barrier coating was prepared by air plasma spraying with the YSZ (8%Y2O3-ZrO2, mass fraction)nanopowder with particle size range of 30-50 nm and grain size of about 12 nm.
采用YSZ(8％Y_2O_3-ZrO_2,质量分数)纳米粉末,经大气等离子喷涂(APS)方法制备得YSZ纳米热障涂层(TBC)。
The coating was prepared on 316L stainless steel by air plasma spraying with a kind of iron base amorphous alloy powder which contains C, Si, B, Cr, W, Mo, Ni, Fe etc. as the plasma spraying powder.
以一种多元素铁基非晶合金粉末(含C,Si,B,Cr,W,Mo,Ni,Fe等)作为喷涂材料,用大气等离子喷涂在316L不锈钢基体上制备涂层.
Nano-TiO_2 powders were calcined at 700℃,1000℃,1200℃ respectively. TiO_2 coatings on carbon steel substrate were fabricated by air plasma spraying.
700℃、1000℃、1200℃下对纳米二氧化钛(TiO_2)粉末进行煅烧,利用大气等离子喷涂(APS)在Q235基体上制备氧化钛纳米结构涂层。
A coating was prepared on 0Crl3Ni5Mo stainless steel by air plasma spraying with a kind of molybdenum base alloy powder which contains Si, B, Cr, W, Mo, Ni etc. as the plasma spraying powder.
用Mo基合金粉末(含Si,B,Cr,W,Mo,Ni等)作为喷涂材料,利用大气等离子喷涂(APS)技术,在0Cr13Ni5Mo不锈钢基体上制备了钼基非晶纳米晶复合涂层.
Hydroxyapatite(HA) coatings on Ti6Al4V substrate were deposited by atmospheric plasma spraying(APS) process.
采用大气等离子喷涂技术,在Ti6Al4V基体上制备了羟基磷灰石涂层.
The Al_2O_3 and ZrO_2 composite thermal barrier coating was prepared on the steel 20G substrate by atmospheric plasma spraying technology.
利用大气等离子喷涂技术(ASP)在20号锅炉钢(20G)基体上制备A l2O3和ZrO2复合粉热障涂层(TBC)。
4. 5% (molar fraction) yttria stabilized zirconia (YSZ) coatings as an electrolyte for solid oxide fuel cells (SOFCs) were prepared using atmospheric plasma spraying process.
采用大气等离子喷涂制备用于固体氧化物燃料电池(SOFCs)、摩尔分数为4.5%YSZ电解质涂层;
The properties of some typical coatings sprayed by ZDP-1700 VPS equipment are also introduced and compared with those of coatings sprayed by atmospheric plasma spray (APS) system, and the results show that VPS-ed coatings have higher-performance than APS-ed coatngs.
介绍了用ZDP－1700型VPS设备喷涂的几种典型涂层的性能，并与大气等离子喷涂（APS）涂层性能作了比较，结果表明VPS的涂层的性能明显地优于APS的涂层的性能。
FeAl coatings having essentially different microstructures were prepared by spraying the atomized (microcrystalline) and milled (nanocrystalline) Fe-Al powders using high velocity oxy-fuel (HVOF) and atmospheric plasma spraying (APS) techniques.
利用超音速火焰喷涂(HVOF)和大气等离子喷涂(APS)工艺分别喷涂了雾化(微米结构的)以及球磨(纳米结构的)Fe-Al粉末制备了不同结构的涂层.
Properties o f vacuum plasma sprayed (VPS-ed )WC-Co coatings,such as bonding strength, microhardness、porosity、 phase composition and carbon content, were studied and compared with those of atmosphere plasma sprayed (APS-ed) WC-Co coatings.
研究了真空等离子喷涂（VPS）WC－Co涂层的性能，如涂层的结合强度、显微硬度、孔隙率、相组成和碳含量等。 并与大气等离子喷涂（APS）的YVC－Co涂层的性能作了对比。
AFl2 (WC- l2 %Co)cemented carbide powder for coating material was studied. coating experiments were performed byAPS atmosphere plasma device. lt showed that YF12 cemented carbide powder is suited for plasma coating with high bondstrength coat and good wear resistance performance
研究了以YF12（WC—12％CO）硬质含金粉作喷涂材料，并采用APS大气等离子装置进行涂层试验，表明YF12硬质含金粉末适于等离子喷涂，涂层粘结强度高，耐磨性能好。
Four types of B.C coatings (one is B.C non-FGM coating and others are B.C/Cu FGM coatings with the composition distribution factorp=0.2, 1, 2) were fabricated by atmosphere plasma spray on copper substrates. The microstructure of B.C/Cu FGM coatings was observed by SEM. The residual Stress was
analyzed by XRD.
以钢为基体，利用大气等离子喷涂技术制备了4种B_4C涂层（纯B_4C涂层和成分分布指数分别为P＝0．2，1，2的B_4C／Cu梯度涂层）．对这几种涂层的形貌进行了观察；
The-nanostructured and conventional zirconia coatings were fabricated by an atmosphere plasma spraying technique. The microstructure of the as-sprayed zirconia coatings was analyzed. The results show that the nanostructured zirconia coating is a typical lamellar structure composed of columnar grain about 100nm in diameter.
利用大气等离子喷涂技术,制备了氧化锆纳米结构和常规结构涂层,并对涂层的显微结构进行了探查．结果表明:纳米结构涂层是由直径为100nm左右的柱状晶粒组成的层状结构;
The nanostructured and conventional zirconia coating were fabricated by atmosphere plasma spraying technique.
利用大气等离子喷涂技术,制备了氧化锆常规和纳米结构涂层。
Wear characteristics of plasma-sprayed coating layers of Al_2O_3
Al_2O_3大气等离子喷涂层的磨损特性
The microstructure of APS ZrO2-8%Y2O3 ceramic coating was studied by scanning acoustic microscopy (150 MHz).
用150 MHz超声显微镜(SAM)研究了大气等离子喷涂ZrO_2-8％Y_2O_3涂层的内部组织缺陷。
properties
对比研究了后氧化处理、封孔和退火、真空退火对大气等离子喷涂 (Al/Ni+Cr2 O3 )陶瓷涂层硬度、结合强度等性能的影响。
A new thermal barrier coatings material LaMgAl_(11)O_(19) was studied,and LaMgAl_(11)O_(19) spray powder that could apply in APS was prepared.
研究了新型热障涂层材料镁基六铝酸镧(LaMgAl11O19),并制备了可应用于大气等离子喷涂的镁基六铝酸镧喷涂粉末。
First, isothermal oxidation test was conducted using two kinds of ZrO_2 thermal barrier coatings stabilized by MgO and Y2O3, respectively.
首先,研究了用大气等离子喷涂方法制备的分别以MgO和Y_2O_3为稳定剂的两种ZrO_2热障涂层的静态氧化行为。
查询“大气等离子”译词为用户自定义的双语例句&&&&我想查看译文中含有：的双语例句
为了更好的帮助您理解掌握查询词或其译词在地道英语中的实际用法，我们为您准备了出自英文原文的大量英语例句，供您参考。&&&&&&&&
The radiating power of the vapors is compared with the radiation of an air plasma of the oncoming flow.
Data of an experimental verification of the obtained results for the case of a cold probe in a flowing air plasma containing added potassium are given.
A Comparative Study of the Effect of Air Plasma and Ozone on the Poly(methylphenylvinylsiloxane) Rubber SKTFV-803
The results of measurements of the rates of oxygen uptake and the formation of gaseous products at the initial stage of the oxygen and air plasma surface treatment of a poly(ethylene terephthalate) (PETP) fabric are reported.
&&&&&&&&&&&&&&&&&&&&&&&&
This study aims to investigate the viability of atmospheric plasma treatment over raw cotton fabric surfaces as an alternative method for superseding the wet textile pre-treatment processes.
For this purpose, the fabric samples were treated with air plasma and argon atmospheric plasma.
To obtain that, one sprays a sacrificial material by an atmospheric plasma spraying torch and obtains a coating layer.
The aging of atmospheric plasma-treated ultrahigh-modulus polyethylene fibers
&&&&&&&&&&&&&&&&&&&&&&&&没有找到相关文摘&&&&相关查询:
在Springer中查有关
在知识搜索中查有关的内容
在数字搜索中查有关的内容
在概念知识元中查有关的内容
在学术趋势中查有关的内容
2008 CNKI－中国知网
北京市公安局海淀分局 备案号：110 1081725
&2008中国知网(cnki) 中国学术期刊(光盘版)电子杂志社您当前的位置：&>&&>&等离子清洗机
上一篇：没有了
下一篇：没有了
名称：&PL-BM60大气等离子清洗机
分类：&等离子清洗机
请输入咨询内容，我们将在24小时内回复您！
详细介绍：
& & & & & & & & & & & & & & & & & & & & & & PL-BM60大气等离子清洗机&
& & & & & &PL-BM60大气等离子清洗机可以在生产线上在线运行处理，无须低压真空环境,降低成本。
而且为了方便用户作业，等离子清洗机的的功率可调控，提高设备的适用率。
& & & &PL-BM60大气等离子清洗机采用低温等离子技术，不用担心产品在生产过程中受损，是各
种配件，材料进行表面处理的最佳处理工艺。
& & & &等离子清洗机工艺特点：
1.喷射出的等离子体流为中性，不带电，可以对各种高分子、金属、橡胶、PCB电路板等材料
进行表面处理；
2.提高塑料件粘接强度，例如PP材料处理后可提升数倍，大部分塑料件处理后可使表面能量达
到 70m达因以上；
3.等离子体处理后表面性能持久稳定，保持时间长；
4.干式方法处理无污染，无废水，符合环保要求；
& & & &&&PL-BM60大气等离子清洗机 ：
& & & 外形尺寸：& & 380*550*220
& & &喷枪直径：60mm(固定和旋转喷头）
& & &转速（旋转喷头）：3000转/分钟
& & &频率：16-20KHZ
& & &功率：0.6-1KW(可调）
& & &电压：180-250V宽范围稳压
& & & & &&
咨询热线：1
扫一扫二维码保存联系信息